BTW...there are more patches to come...but they won't (shouldn't) affect WSJT-X.
I have a report of relay chattering on the 7610 that is new but that only 
happens in split mode and hope to have that fixed today if my tester gets back 
to me.
Mike


 

    On Tuesday, November 26, 2019, 06:53:01 AM CST, Bill Somerville 
<g4...@classdesign.com> wrote:  
 
  Hi Mike, 
  is this just a build from the current Hamlib master, or are there some more 
patches to come? I ask because I want to build WSJT-X 2.1.2 kits today with 
this issue  resolved. 
  73
 Bill
 G4WJS. 
  On 26/11/2019 12:44, Black Michael via wsjt-devel wrote:
  
   
  https://www.dropbox.com/s/dyopovfc318r0dd/bin.zip?dl=0
  
  Mike  
    
  
      On Monday, November 25, 2019, 11:12:30 PM CST, Black Michael 
<mdblac...@yahoo.com> wrote:  
  
        For those having Icom rig control problems here's a zip file of a 
32-bit version of hamlib.  
  https://www.dropbox.com/s/9gv73e9m0stijxw/gitnotes.docx?dl=0
  
  
  It will work with the 64-bit version of WSJT-X also. 
  #1 Unzip this file into it's own directory. 
  #2 Ensure WSJT-X is not running. 
  #3 Run this from a command prompt with an appropriate string for your right 
like the IC-7610 here 
  rigctl -l | find "7610" 
  You will get a result like this:    378  Icom                   IC-7610       
          0.10            Untested
  
  Now run rigctld with the number returned from the above command.  Adjust com 
port and baud to suit. 
  rigctld -m 378 -r com1 -s 19200 -vvvvv -Z >log.txt 2>&1 
  #4 Start WSJT-X and select "Hamlib NET rigctl" for the rig. 
  Hopefully this works for ya'll...if not please send me the log.txt file. 
  de Mike W9MDB        
 

 
 _______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
  
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to