On 29/05/2020 15:20, David Reinhart wrote:
Hello,
I tried to put in a bug report earlier about a problem I and a lot of
others are having with the software just stopping to decode with no
apparent reason. Good thing it was rejected because the membership
list hadn't caught up, because I found out what's going on.
One of the things I did was reinstall the SW, but when I launched it I
noticed the settings hadn't changed. That jingled a bell (eventually)
from my years in SW test, so I went back and renamed the .ini file,
started the program up, and put in my configuration information.
Bingo, it worked.
I am attaching the bad .ini file and my current one. If I was running
Linux and had diff I'd compare them myself, but I'm not.
David Reinhart, W4DSR
Hi David,
please do not attribute your setup issues with other reports of issues
without any evidence they are related.
Your settings file is not corrupt, I suggest you restore it and then
consider the following settings issues:
* Your Tx audio device is the Windows default audio device, that is
rarely a correct choice
* Your "Menu->Decode" depth setting is "Normal", unless you have a
slow CPU you might consider using "Deep"
* You have the "Ref Spec" option checked on the Wide Graph window
controls, unless you have recorded a reference spectrum that will
not be a correct setting.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
