Hi
I am finding 2.2.1 almost unusable on a crowded band with a Pi4 4gb
running Raspbian Buster.
I have Decode set to fast.
Start of cycle 21:46:00 (:00)
about 21:46:13 decodes start scrolling for about 2 seconds
about 21:46:16 more decodes will show up with time of :00
these decodes (:00) will continue until 21:46:28 or even later
This results in many decodes scrolling by that are actually from the
previous cycle.
Some observations.
With 2.2.1 setting Decode to Normal or Deep does not make a huge
difference while on the 2.1.2 the difference was very noticeable.
On 2.2.1 with decode set to fast on a crowded band at the end of the
cycle decoding was much faster and all decodes would start displaying
about a second before the end of the cycle and be finished before the
end of the first second of the next cycle. ie :00 decode scroll between
:14 and :00. Decodes would happen very fast.
With 2.1.2 I could run 3 instances of WSJT-X without issue.
With 2.1.2 top shows wsjtx cpu ~5% mem 3%
With 2.2.2 top shows wsjtx cpu ~10% mem ~3%
2.2.2 also show jt9 running between 15 and 60%
Thanks for all the great work and just ask if I can supply more details.
73
Glenn VE9GJ
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
