Bill,
that doesn't tell me much, but I was assuming that you *added* 7.071
MHz, rather than replaced 7.074 MHz, since you said in you OP "I tried
adding the new frequencies". I would expect to see two 7MHz frequencies
on the drop down list, but you image only shows one. If you had
inadvertently entered 7071 MHz (7.071 GHz) then that entry will be
further down the list since they are in frequency order.
73
Bill
G4WJS.
On 09/06/2020 17:03, Bill Mullin wrote:
Hello Bill,
I'm not sure what you're talking about? Here's the list without the
7.071:
http://aa4m.com/Pic1.jpg
And here it is with the 7.071:
http://aa4m.com/Pic2.jpg <http://aa4m.com/Pic1.jpg>
73, Bill AA4M
Tucson, AZ
On 06/09/2020 08:30:04, Bill Somerville wrote:
On 09/06/2020 16:14, Bill Mullin wrote:
Here's something to think about. When I added 7.071 to the menu,
this should have made no difference to the drop down menu since the
characters "7.071" are the same width or even smaller than many of
the other lines in the menu. It makes no sense that this would have
caused the truncation of ANY characters.
Hi Bill,
are you sure you added 7.071 MHz? I ask because I only see one 40m
frequency on your messed up drop down list. When you enter new
working frequencies the entry is in MHz i.e. 7.071 . If you entered
7071 that that is 7.071 GHz.
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
