Hi Dirk,
so I can see what is happening please put the attached file into your
WSJT-X configuration files directory (on MS Windows that is the same as
the log files directory - "Menu->File->Open log directory"), then
restart WSJT-X and run a minimal test that demonstrates one of the
issues, then quit WSJT-X. There will be a new file on your Desktop
called WSJT-X_RigControl.log, send that to me for analysis please (g4wjs
<at> classdesign <dot> com).
Once you have sent the log file you should delete the
wsjtx_log_config.ini and WSJT-X_RigControl.log files to revert to normal
operation.
73
Bill
G4WJS.
On 06/03/2021 11:37, Dirk Kuschke via wsjt-devel wrote:
Bill,
sorry, but the update do not fix the problem., it makes it worse.
Error 1) the same mistake as before with the switch to split.
Error 2 VFO A LED flashed and no signal receive after band change.
after pushing the VFO A knop at trx, the trx work well until next band
change.
Then the error occurs again
Regards
73 Dirk
DD5KD
Am Mittwoch, 17. Februar 2021, 16:29:20 MEZ hat Bill Somerville
<g4...@classdesign.com> Folgendes geschrieben:
On 17/02/2021 15:03, Dirk Kuschke via wsjt-devel wrote:
Hello,
since FTDX version 2.3.0
my yaesu ftdx3000d changes to split mode when I change the frequency,
using the button on the left. Up to version WSJTX2.2.2 this was not
the case.
The settings are:
Inline-Bild Inline-Bild
I change the Databits between 7 or 8 and the Stop bits between 1 or 2
with
no effect. The correct setting Databit 8 and 2 Stop bits lt. Yaesu UK.
In the settings i also change the radio to Yaesu FT-950 with the same
affect change to split mode….
73, Dirk
Hi Dirk,
if this is happening when you change bands then it is because SPLIT
was set the last time that band was used on the rig. If you disable
SPLIT it should be fine the next time you change to that band. The
same applies for other bands. The change in behaviour is that WSJT-X,
via Hamlib, is changing bands on your rig as if you have clicked the
target band button before changing to the target frequency in that
band. The reason for the change is that other settings are also
recalled per band like the aerial socket, pre-amp settings, etc..
73
Bill
G4WJS.
[Sinks.SYSLOG]
Destination=TextFile
Asynchronous=true
AutoFlush=false
FileName="${AppLocalDataLocation}/wsjtx_syslog.log"
TargetFileName="${AppLocalDataLocation}/logs/wsjtx_syslog_%Y-%m.log"
RotationTimePoint="01 00:00:00"
Append=true
EnableFinalRotation=false
MaxSize=41943040
MinFreeSpace=1073741824
MaxFiles=12
Target="${AppLocalDataLocation}/logs"
ScanForFiles="Matching"
Format="[%Channel%][%TimeStamp(format=\"%Y-%m-%d
%H:%M:%S.%f\")%][%Uptime(format=\"%O:%M:%S.%f\")%][%Severity%] %Message%"
Filter="%Severity% >= info"
[Sinks.RIGCTRL]
Destination=TextFile
Asynchronous=true
AutoFlush=true
FileName="${DesktopLocation}/WSJT-X_RigControl.log"
Append=true
Format="[%TimeStamp(format=\"%Y-%m-%d
%H:%M:%S.%f\")%][%Uptime(format=\"%O:%M:%S.%f\")%][%Channel%:%Severity%]
%Message%"
Filter="%Channel% matches \"RIGCTRL\" | %Severity% >= info"
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
