Can someone help me with the following observation? Is this a problem with my settings, is it a bug or is there some other reason?
I have 2 instances '1' and '2' which are connected to an ANAN transceiver with CAT over separate virtual COM ports. The system works very well when split operation is set to 'None'. When split operation is set to 'Fake it' then during transmission on instance 1 BOTH instances change their dial frequency according to their respective Audio TX Frequency settings. I had not expected instance 2 to change frequency. The radio VFO 2 does not change. This applies when the last band switch was done using the instance 2 band control. When I do a band switch using the radio (VFO 2), say from 20m to 17m, WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 becomes even more confusing. During transmission on instance 1, the dial frequency for instance 1 changes as before but instance 2 changes back to 20m, again with the corresponding offset. My station: 2 * WSJT-X v2.4.0-rc4 Windows 8.1 Unique identifiers have been assigned to the 2 instances. UDP settings are the same for the 2 instances. UDP server: 239.255.0.0 UDP Server port number: 2237 Outgoing interfaces: loobback_0 Multicast TTL: 1 All 3 UDP checkboxes are checked. 73, Ton PA0TBR
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
