Operating System is Windows 10 (20H2)
Some good news for those that had the problem of your IC-7300 dropping
out of DATA mode when using HRD as the Rig Control for WSJT-X. Not sure
if the fix is in HRD or WSJT-X as both have new versions. If you
remember with previous versions if you had WSJT-X set to use the MODE
setting of Data/Pkt, then when you switched between TX and RX the Mode
indicator on the 7300's display would "twitch" every time and sometimes
it would drop out of USB-D and go to just plain USB. The temporary fix
was to set WSJT-X mode control to NONE and set the radio to USB-D
manually. I am now running version 6.7.0.391 of HRD and version 2.5.0 of
WSJT-X and with WSJT-X set to Data/Pkt there is no more "twitching" of
the mode indicator on the 7300 and the mode appears to stay put and not
drop out of USB-D. Now that the IC-9700 Rig Control has added the
missing DATA mode to the software the IC-9700 also appears to behave
well using WSJT-X under HRD Rig Control. Check it out to see if it is
working for you as well.
73 KA2ENE
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
