Harry, why are you using HRD for your rig control? It all can be done
with the 7300. Use WSJT-X to direct the logging to hrd for your
logging. I have not had any hick-ups doing it this way. Also is true for
the 7610 as well. I can also use JT-Alert and I tell it not to log to
hrd so I do not get a double logging of the contact.as well.
Maybe I'm missing something in the conversation.
Bruce WA1YZN
On 10/4/2021 15:01, Harry E. Hoffman via wsjt-devel wrote:
Operating System is Windows 10 (20H2)
Some good news for those that had the problem of your IC-7300 dropping
out of DATA mode when using HRD as the Rig Control for WSJT-X. Not
sure if the fix is in HRD or WSJT-X as both have new versions. If you
remember with previous versions if you had WSJT-X set to use the MODE
setting of Data/Pkt, then when you switched between TX and RX the Mode
indicator on the 7300's display would "twitch" every time and
sometimes it would drop out of USB-D and go to just plain USB. The
temporary fix was to set WSJT-X mode control to NONE and set the radio
to USB-D manually. I am now running version 6.7.0.391 of HRD and
version 2.5.0 of WSJT-X and with WSJT-X set to Data/Pkt there is no
more "twitching" of the mode indicator on the 7300 and the mode
appears to stay put and not drop out of USB-D. Now that the IC-9700
Rig Control has added the missing DATA mode to the software the
IC-9700 also appears to behave well using WSJT-X under HRD Rig
Control. Check it out to see if it is working for you as well.
73 KA2ENE
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
