The driver for the virtual serial port has been downloaded from a Kenwood site. The driver for the soundcard of the 890 has been searched by Win7 itself after connected the rig to the PC. The behavior of Win10 was different - after connecting the rig to the PC nothing happened and no soundcard of the rig has been offered, neither a microphone or line input. Believe me, it's the first time I've heard about this problem in Win10... Donnerstag, 14 Oktober 2021, 08:19PM +02:00 von Bill Somerville [email protected] :
>Hi Enrico, > >the driver install is for the virtual > serial port over the USB connection. Are you saying that no "USB > audio codec" audio devices appear for you rig when you connect via > USB and power on the rig? If that is the case then you probably > need to take the matter up with Kenwood or Microsoft, WSJT-X > requires working audio devices. > >73 >Bill >G4WJS. > >On 14/10/2021 19:15, [email protected] wrote: >>As I told before in Win7 >> everything works perfect. >>It is a problem of the basic installation in Win10. >>In Win7 when you connect the 890 a driver for the soundcard has >> been searched and installed from Win7 by itself - not in >> Win10... Donnerstag, 14 Oktober 2021, 08:01PM +02:00 von Bill >> Somerville [email protected] : >> >>>Hi Enrico, >>> >>>have you >>> followed the instructions in the TS-890S User Manual >>> (page 1-4 in the English version) about setting the >>> audio source input? >>> >>>In WSJT-X >>> "Settings-> Radio" select "Mode-Data/Pkt" and "Tx >>> Audio Source-> Rear". >>> >>>73 >>>Bill >>>G4WJS. >>> >>>On 14/10/2021 >>> 18:47, [email protected] wrote: >>>>Dear Bill, >>>>I connect the TS890S by USB (the B-connector). >>>>Before connecting the Rig I installed the Kenwood >>>> driver. >>>>Software is WSJT-X 2.5.0 64bit. >>>>Same procedure on Win7 and Win10. >>>>Win7 is working, Win 10 doesn't. >>>>regards >>>>Enrico OE1EQW >>>>-- >>>>Gesendet über Outlook Email App für Android Donnerstag, 14 Oktober 2021, >>>>05:40PM +02:00 von Bill >>>> Somerville via wsjt-devel >>>> [email protected] : >>>> >>>>>On >>>>> 14/10/2021 16:12, Enrico Schürrer OE1EQW via >>>>> wsjt-devel wrote: > Dear friends, > > I have problems to get the audio from the >>>>> TS890S into Win10. > Kenwood driver installed, the right >>>>> soundcard of the TS890 selected - > no tone. > > Doing the same on a Win7/64bit-PC I had >>>>> no problems and it works free > of errors. > > Anybody who can give me a hint? > > tnx in advance > > Enrico, OE1EQW >>>>> >>>>>Hi Enrico, >>>>> >>>>>we need more information to address your >>>>> query. How is your rig >>>>>connected to your PC for audio? Do you have a >>>>> CAT connection? Which >>>>>application are you trying to run? >>>>> >>>>>73 >>>>>Bill >>>>>G4WJS. >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
