Hello Bill, yes those displays are indeed different as on one you have defined a UDP broadcast address of 244.0.0.1 which then prompts the WSJT software to offer you a selection for an interface to apply this to. Ethrnet or loopback normally, plus the multicast TTL, whereas the other version is the STOCK config.
You can make them look the same by putting in the broadcast address of 127.0.0.1 and all the other options will go away after you hit OK All of my instances of WSJT-X have the 244.0.0.1 setup so I can use the monitoring software across my farm of PC's Regards, Peter, vk5pj On Thu, Nov 4, 2021 at 12:20 PM Bill Barrett via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > This is from 2.5.0, first and second instance on Win11 > does anyone know why they are different? > > Thanks; > Bill W2PKY > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
