Hello Peter- Thanks, yes, if 224 and the extra fields are present and 127 is entered the extra fields go away.
On Wed, Nov 3, 2021 at 10:08 PM Peter Sumner via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Hello Bill, > yes those displays are indeed different as on one you have defined a UDP > broadcast address of 244.0.0.1 which then prompts the WSJT software to > offer you a selection for an interface to apply this to. Ethrnet or > loopback normally, plus the multicast TTL, whereas the other version is the > STOCK config. > > You can make them look the same by putting in the broadcast address of > 127.0.0.1 and all the other options will go away after you hit OK > > All of my instances of WSJT-X have the 244.0.0.1 setup so I can use the > monitoring software across my farm of PC's > > Regards, > Peter, vk5pj > > On Thu, Nov 4, 2021 at 12:20 PM Bill Barrett via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > >> This is from 2.5.0, first and second instance on Win11 >> does anyone know why they are different? >> >> Thanks; >> Bill W2PKY >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
