You wrote:
I recently added an FDM-S3 and the FDM-SW2 which uses virtual audio, however 
the problem occurs even when the S3 is powered down and the USB3 cable is 
disconnected. There is no audio transport on this device, the audio comes from 
the software.

Try uninstalling FDM-SW2...

Add maybe reinstalling the drivers for the TS-890S.

BCNU DE N2LO~>



>     On 05/16/2022 4:25 AM Conrad PA5Y via wsjt-devel 
> <wsjt-devel@lists.sourceforge.net> wrote:
> 
> 
> 
>     I am asking about this problem here because I know this is where the most 
> knowledge is.
> 
> 
>     I have a TS-890S and use the USB Audio Codec. When I first got it about a 
> year ago I was losing audio after 20-30 mins or so. So I checked the power 
> management settings for both the OS and the individual USB hubs in Windows 10 
> device manager. The drivers indicate S0 which I understand means no power 
> management. I also found that it was important to select the left audio 
> channel. I have had 1 year of trouble free operation.
> 
> 
>     I am using Omnirig for radio control which appears to work as expected.
> 
> 
>     Now the problem has returned. The input meter works but the waterfall 
> stops and so do the decodes.
> 
>     Merely toggling the monitor button restores the waterfall and decoder. So 
> it must be the audio stream.
> 
> 
>     The power management settings are the same as they were, I checked them 
> all again.
> 
> 
>     I recently added an FDM-S3 and the FDM-SW2 which uses virtual audio, 
> however the problem occurs even when the S3 is powered down and the USB3 
> cable is disconnected. There is no audio transport on this device, the audio 
> comes from the software.
> 
> 
>     When I am actually operating and going from TX to RX there does not seem 
> to be any problem at all, only when I am monitoring on RX. Incidentally the 
> problem occurs (unsurprisingly) with JTDX as well, which I use on 6m 
> exclusively.
> 
> 
>     Anybody got any ideas what else I can do? Is there some debug function 
> that I can use to help with diagnostics?
> 
> 
>     Regards
> 
> 
>     Conrad PA5Y
> 
>     _______________________________________________
>     wsjt-devel mailing list
>     wsjt-devel@lists.sourceforge.net
>     https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> 
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to