According to what I have the Xeigu X6100 does not have a Data/Pkt mode.
You have something that indicates it does?
If you can generate some debug with this and put the Xiegu into Data/Pkt before
you start WSJT-X I can see what it is providing.
Please place this file as described
belowhttps://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log file will
be in the same location For Linux put it in ~/.config The
WSJT-X_Rigcontrol.log file will be here: ~/.local/share/WSJT-X Restart WSJT-X
and duplicate the problem.Shut down WSJT-X
Then send me the WSJT-X_RigControl.log fileMike W9MDB
On Tuesday, May 31, 2022, 04:17:41 PM CDT, Al Pawlowski via wsjt-devel
<[email protected]> wrote:
I have two radios - ANAN-100B/Thetis and Xiegu X6100.
Rig & Fake It split operation both work fine for the ANAN using FlexRadio/ANAN
PowerSDR/Thetis, even when changing tx frequency during tx. Mode set for
Data/PKT. I did not test USB.
Fake It split operation works for the X6100 using Xiegu X6100, even when
changing tx frequency during tx. Rig caused comm errors and no VFO changes.
Mode set for USB. Data/Pkt does not work (comm errors) for either split
operation.
Al Pawlowski
Los Osos, CA USA
On May 31, 2022, at 10:38, [email protected] wrote:
Date: Tue, 31 May 2022 16:04:45 +0000 (UTC)
From: Black Michael <[email protected]>
To: WSJTX Group <[email protected]>, WSJT Software Development
<[email protected]>
Subject: [wsjt-devel] Hamlib testing
Message-ID: <[email protected]>
Content-Type: text/plain; charset="utf-8"
I need everyone to test the latest Hamlib?Testing in Rig Split and Fake It
would be appreciated.Successes/Failures please report.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
