Tried 2.6.0-rc4 to see if it would fix a problem I have with 2.5.4 on a new Windows 11 laptop. It didn’t. The problem is that WSJT-x is not processing received audio signals from the IC 7300 on the new laptop. The waterfall shows only ambient noise and there are no decodes. CAT anf PTT are fine and WSJT-x gets the W11 laptop to send audio to the 7300 and the radio transmits. But no audio is processed on the receive side. Yet the Windows sound settings show the volume on the codec going up and down with what I hear in the headphones connected to the 7300. So the incoming audio is with Windows but not WSJT-x. Ray KN2K
Sent from the all new AOL app for iOS On Sunday, September 18, 2022, 11:03 AM, Saku via wsjt-devel <wsjt-devel@lists.sourceforge.net> wrote: OH1MRR suggested that because FH/OK1M does use pure wsjt-x it causes the problem. Could be he is using other software, but as far as I can understand mainwindow.ccp lines 3930 - 3960 do not care is the Fox true fox or mshv. If that is the reason, then the problem lays somewhere else in code. 3930 - 3960 should pass it ok through. But as said my C is not very good, and I have not followed the whole receiving chain yet. I sent another bug report too. But it is not passed to devel list. At least yet. It had small screen part capture included. -- Saku OH1KH _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
