To me, it sounds like you have the wrong input selected on the audio tab in WSJT-X. Make a note of what it is set to now and then try the other options in that drop down field.
--Dennis NE6I From: crohtun--- via wsjt-devel <wsjt-devel@lists.sourceforge.net> Sent: Sunday, September 18, 2022 8:26 AM To: WSJT software development <wsjt-devel@lists.sourceforge.net> Cc: croh...@aol.com Subject: Re: [wsjt-devel] Sound Card Issue Tried 2.6.0-rc4 to see if it would fix a problem I have with 2.5.4 on a new Windows 11 laptop. It didn’t. The problem is that WSJT-x is not processing received audio signals from the IC 7300 on the new laptop. The waterfall shows only ambient noise and there are no decodes. CAT anf PTT are fine and WSJT-x gets the W11 laptop to send audio to the 7300 and the radio transmits. But no audio is processed on the receive side. Yet the Windows sound settings show the volume on the codec going up and down with what I hear in the headphones connected to the 7300. So the incoming audio is with Windows but not WSJT-x. Ray KN2K
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
