More detail on "Main window size/position is not remembered through shutdown re-start. (previously reported and seems to be in all versions since 2.3.0)"
I'm running a laptop PC with an additional monitor. I have the WSJT-X main window positioned in the lower right corner of the laptop screen. I set the window so the right edge is at the edge of the screen and the bottom of the window is just above the task bar. I then drag the left edge to set minimum width and drag the top to set desired height. I then close WSJT-X. When I re-open WSJT-X 2.6.0-rc5 the main window top, bottom, and left side are where I placed them. The window width is greater than I set and the right edge of the main window is off the side of laptop screen. I then have to drag the window back on screen and re-adjust the left edge back to minimum width. The problem was introduced after ver 2.3.0. If I close rc5 and open 2.3.0 the main window is positioned as I had set it in rc5. If I close 2.3.0 and open rc5 the right edge of the main widow is off screen. 73, Andy, k3wyc
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel