I can confirm this also happens with the Mac version. best, alex K6LOT
> On Nov 30, 2022, at 8:20 AM, Andy Durbin via wsjt-devel > <wsjt-devel@lists.sourceforge.net> wrote: > > > More detail on "Main window size/position is not remembered through shutdown > re-start. (previously reported and seems to be in all versions since 2.3.0)" > > I'm running a laptop PC with an additional monitor. I have the WSJT-X main > window positioned in the lower right corner of the laptop screen. I set the > window so the right edge is at the edge of the screen and the bottom of the > window is just above the task bar. > > I then drag the left edge to set minimum width and drag the top to set > desired height. I then close WSJT-X. When I re-open WSJT-X 2.6.0-rc5 the > main window top, bottom, and left side are where I placed them. The window > width is greater than I set and the right edge of the main window is off the > side of laptop screen. I then have to drag the window back on screen and > re-adjust the left edge back to minimum width. > > The problem was introduced after ver 2.3.0. If I close rc5 and open 2.3.0 the > main window is positioned as I had set it in rc5. If I close 2.3.0 and open > rc5 the right edge of the main widow is off screen. > > 73, > Andy, k3wyc > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel