Saku,
My experience has been that pskreporter displays the frequency as received by
the receiving station. So, this would be display frequency plus the audio
frequency used for the qso.
Sometimes the two are not the same, for instance, your transmit frequency and
that of the other station may differ. This is because of small differences in
frequency of the rigs used duringthe qso. Also, on 144Mhz, some folks, like
me, use a transverter to put them on 2 meters. My transverter is always a
little off frequency. I've seen no difference in the reporting frequencies no
matterthe version of WSJT-X.
Hope this helps.
73,Andy, ka2uqw
On Friday, December 23, 2022 at 03:39:55 AM EST, Saku via wsjt-devel
<[email protected]> wrote:
Hi!
I worked a local qso on 144.150 using FT8 (that was displayed on WSJT-X
frequency reading)
Afterwards I looked at pskreporter where both our calls were reported on
144.175
I.E. frequency that was stored WSJT-X band quick settings (144.174) +
audio frequency.
Now question is:
Does reporting use stored quick setting frequency or true frequency that
is received via CAT ?
In case of former one: Is this bug or not?
Wsjtx-rc5
Fedora 35
IC706
--
Saku
OH1KH
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
