Please not unless the user is told it will happen, or better still that
their original setting is restored during the WSJT-X close process.
Alan G0TLK, sent from my mobile device
On 28 September 2024 04:32:22 Black Michael via wsjt-devel
<[email protected]> wrote:
The AGC problems I noted would likely only be a problem for a low level
signal where the amplitude change could drop the signal too low.
We need to do some testing but I'm considering changing Hamlib to put all
rigs on FAST AGC (if AGC is not OFF) for WSJT-X operation. So a setting of
medium or slow would get changed to fast.
Mike W9MDB
On Friday, September 27, 2024 at 04:21:24 PM CDT, Gary McDuffie via
wsjt-devel <[email protected]> wrote:
On Aug 7, 2024, at 10:31, Enrico OE1EQW via wsjt-devel
<[email protected]> wrote:
With AGC fast there is no problem on my Kenwood TS-890S and my Icom 7300.
I had no problem with SF on the previous expeditions with AGC fast, slow,
or medium with my 890. I run 1, 16, and 20 for the 3 speeds of AGC. They
all work in almost all cases (for me). RF gain is almost always full tilt.
Signals were from +18 to -15/-16.
73, Gary - AG0N
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
