On 7/16/2025 6:01 PM, Peter Sumner via wsjt-devel wrote:
"FST4W-120 on Ten Bands Simultaneously" seems to roughly match up with the freq you mentioned (depending on what Sideband you were using to read the CW)
My observation of frequency was an approximation. I've long been an active CW op, and copied the CW while monitoring in WSJT-X.
My failure to decode was because he was outside the 100 Hz window of the 1500 Hz offset default. When I moved the center frequency, he decoded every cycle.
BUT -- a question emerged. There were several other signals on the band last night with solidly visible traces for the entire 2 minute period, but when I moved the window to include a few hundred Hz to include them, they didn't decode, but WB6CXC did. Does FST4W only decode one signal at at a time. I looked for documentation specific to FST4W, but didn't find anything.
Thanks and 73, Jim K9YC _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
