On Sun, 22 Dec 2013 17:30:06 -0600 Steve Rogers <[email protected]> wrote:
> I recently installed xastir on raspberry pi via binary and remove it > and installed cvs 2.0.5 version. When I startup xastir it lags > during map window and then freezes completely on weather alert maps > and cpu is 100%. I look at Top and xastir cpu is 73-84%, my memory > split is 256. Im not seeing any errors in the terminal. steve kd5mkv > > > I've just put the pi in service as Igate, using ax25 and aprx, and am running a USB Lilliput monitor, LXDE and Xastir on that top shows top - 08:54:19 up 35 min, 2 users, load average: 0.09, 0.20, 0.15 Tasks: 105 total, 1 running, 104 sleeping, 0 stopped, 0 zombie %Cpu(s): 11.9 us, 8.7 sy, 0.0 ni, 79.1 id, 0.0 wa, 0.4 hi, 0.0 si, 0.0 st KiB Mem: 221532 total, 209212 used, 12320 free, 14068 buffers KiB Swap: 262140 total, 0 used, 262140 free, 111128 cached The only map I've got on the display is the worldhi.map at 200km shown on the range. I can see coastline and 2 major rivers, and honestly, I know where all the fixed stations are, which is just as good as names on the map. This map has no roads, so this wouldn't do for use in the car, but is fine for the shack. Liz VK2XSE _______________________________________________ Xastir mailing list [email protected] http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
