I'm working on a tracking system that's only partly APRS based, but converts to APRS as that's where most of my tracking gear/experience exists. I'm looking for digipeating capability with >2 channels, and the ability to network (e.g. tcp or up data sources, remote connection to xastir, etc).
Any recommendations for some network capable digi / igate / etc software that will run on a beagle bone and do this? I'm sort of leaning toward a fairly dumb script setup since that's easy and I have N channels that are RX-only and an APRS frequency that could be TX only. I would like to get xastir plugged in here somewhere, preferably with TX/RX capability and without using another radio. (the easy solution is throwing a bunch of hrware at the problem, but i don't have a dozen APRS rigs). The basic system is a serial data stream that has APRS data (text format, not true ax.25 therefore not KISS capable). There are one or more of these receivers as well as an APRS radio (Kenwood D700) to gateway to APRS-RF (non-144.39 channel). -Jason kg4wsv _______________________________________________ Xastir mailing list [email protected] http://xastir.org/mailman/listinfo/xastir
