For some reason unknown to me, Xastir cannot open my ttyS0 port which connects a KPC 9612+ (V 8.2). The system has been running fine for several years with exactly the same hardware setup and I do not recall any changes to anything except the usual RedHat and Xastir patches/upgrades. I took the KPC 9612+ out of and back into KISS mode and it seems to be receiving ok. As best I can tell, the COM 1 port is working ok. The Xastir program runs fine but it can't open ttyS0 and gives the Hard Fail error.
If anyone has any suggestions about how I might figure this out then I would greatly appreciate it. Thanks. Bob N4MRV Ashland, VA I am presently running Xastir 1.8.5 on RedHat 4 (2.6.9-42.0.10.EL) Linux 2.6.9-42.0.10.EL #1 Fri Feb 16 17:06:10 EST 2007 i686 athlon i386 GNU/Linux configure:3482: result: found /dev/ttyS0 and /dev/ttyS1 _______________________________________________ Xastir mailing list Xastir@xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir