On 6/11/07, Jeremy Utley <[EMAIL PROTECTED]> wrote:
As I remember it, the KPC-9612 is an odd beast - it's a dual-port TNC
(both 1200 & 9600 baud modems in it). Xastir can't directly speak to both ports at once via KISS as far as I know - you might be able to get it to work without KISS. You could also set up Linux's AX.25 support directly, using mkiss to set up both ports - I did this at one time for my KAM (both 300baud and 1200baud modems). HTH, Jeremy, NW7JU
The 9600 port is really for point to point as I recall. For APRS I never used anything but the 1200 baud port. I had it working several years ago with APRS+ SA - I think I just told the software it was a KPC3. I don't remember if APRS+ used Kiss mode with it or not. It's been so long since I used it - memory is fading. Thanks, Lee - K5DAT _______________________________________________ Xastir mailing list Xastir@xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
