OK, now I see what's happening. The rare posits that are displayed have the callsign preceded by "}" (no quotes)... so the framing is not config'd properly cause the "}" would be a terminating character for the previous packet.
I tried turning AUTOLF ON, but no difference. Currently XFLOW is off (cause the ts2000 has a fully implemented rs232 [I think]) so maybe I'll try that). Anyone slayed this demon before? Also, is there a cmd interface to the tnc from within Xastir? Thx, Rick - kg4ofo ----- Original Message ----- From: "Curt, WE7U" <[EMAIL PROTECTED]> To: "Rick Bolen (HM)" <[EMAIL PROTECTED]> Cc: "Xastir Users" <xastir@xastir.org> Sent: Thursday, June 28, 2007 5:18 PM Subject: Re: [Xastir] Only seeing posits of path APZ256 | 7 > On Thu, 28 Jun 2007, Rick Bolen (HM) wrote: > > > When I've fired up my UI-View32, I see dozens of local packets. > > > > It's like there is a filter enabled or something. Or could there be a TNC > > setting I need to init? > > In Xastir's "View Incoming Data" dialog are you seeing one line for > each packet coming in, or two? If each packet produces two lines > from the TNC to Xastir, that's the problem. Generally APRS programs > need all of the information on one line. > > It's a TNC setting. You might want to look at the tnc-startup.d700 > or tnc-startup.thd7 files to see what settings you might want to use > for the 2000. Once you figure it out, create a tnc-startup.2000 > file with the settings and tell Xastir to use that on startup of > that interface. > > -- > Curt, WE7U. APRS Client Comparisons: http://www.eskimo.com/~archer > "Lotto: A tax on people who are bad at math." -- unknown > "Windows: Microsoft's tax on computer illiterates." -- WE7U > "The world DOES revolve around me: I picked the coordinate system!" > _______________________________________________ Xastir mailing list Xastir@xastir.org http://lists.xastir.org/cgi-bin/mailman/listinfo/xastir
