Thanks, using xnba solved it.
Regards,
Heince
On Nov 16, 2011, at 4:17 PM, Xiao Peng Wang <[email protected]> wrote:
> You can change the value of 'netboot' to 'xnba' from 'pxe' if you were using
> the 'pxe' and try again.
> The change of 'default xCAT' in the configuration file can be done in the
> pxe.pm or xnba.pm depends on which method you were used in 'netboot'.
>
>
> Thanks
> Best Regards
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: [email protected]
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian
> District Beijing P.R.China 100193
>
> <graycol.gif>"heince.nvg" ---2011-11-15 21:30:58---Hi, I use 2.6.8 CentOS 6.0
> on IBM x3755 & x3850 x5.
>
> From: "heince.nvg" <[email protected]>
> To: [email protected]
> Date: 2011-11-15 21:30
> Subject: [xcat-user] node can't boot after installation
>
>
>
> Hi,
>
> I use 2.6.8 CentOS 6.0 on IBM x3755 & x3850 x5.
>
> After installation finished, node can't boot to disk.
>
> I have to change 'default xCAT' to 'default chain.c32' on the node tftpboot
> config file then it can boot.
>
> so, i need to modify tftp config on mn for each node after postscripts is
> finished.
>
> where can i add this line on xCAT ?
>
> Thanks,
> Heince
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1_______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
RSA(R) Conference 2012
Save $700 by Nov 18
Register now
http://p.sf.net/sfu/rsa-sfdev2dev1
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
