If the packages in the SDK have been installed, I guess the autoyast and ospkgs setup should be correct, there might be some real package resolver problem, I had ever seen some similar problems when I manually selected some packages using the anaconda or autoyast GUI installation interface.
Thanks, ------------------------------------------------------------------------- Li,Guang Cheng (李光成) IBM China System Technology Laboratory Email: ligua...@cn.ibm.com Address: Building 28, ZhongGuanCun Software Park, No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC 北京市海淀区东北旺西路8号中关村软件园28号楼 邮编: 100193 "Stagneth, Andre" <andre.stagneth@h p.com> To Guang Cheng Li/China/IBM@IBMCN 2012-05-15 17:08 cc Subject RE: [xcat-user] SLES11SP1 with SDK Hi, That’s the way I go. The system is installing. I can see that repository is added. And some packages from the sdk too. But after first reboot I get the message " The package resolver run failed. Please check your software section in the autoyast profile". But I didn’t change anything at the software section in the autoyast file. Regards, André From: Guang Cheng Li [mailto:ligua...@cn.ibm.com] Sent: Dienstag, 15. Mai 2012 03:30 To: xCAT Users Mailing list Cc: xCAT Users Mailing list Subject: Re: [xcat-user] SLES11SP1 with SDK HI, Here is the procedure of using the SLES 11 SDK: 1. copycds /path/to/the/sdk/isoimage, the sdk images will be copied to /install/sles11.x/arch/sdk1/ 2. Set the node to use template /opt/xcat/share/xcat/install/sles/compute.sdk.sles11.tmpl 3. nodeset <node_name> install 4. In the autoyast template file /install/autoinst/<node_name>, you will see something like this: <add-on> <add_on_products config:type="list"> <listentry> <media_url>http://192.168.0.208/install/sles11.1/ppc64/sdk1 </media_url> <product>SuSE-Linux-SDK</product> <product_dir>/</product_dir> <ask_on_error config:type="boolean">false</ask_on_error> <!-- available since openSUSE 11.0 --> <name>SuSE-Linux-SDK</name> <!-- available since openSUSE 11.1/SLES11 (bnc#433981) --> </listentry> </add_on_products> </add-on> 5. If the installation still fails, when the node is up and running, could you run zypper on the compute node to try to install the packages to see what is going wrong? Thanks, ------------------------------------------------------------------------- Li,Guang Cheng (李光成) IBM China System Technology Laboratory Email: ligua...@cn.ibm.com Address: Building 28, ZhongGuanCun Software Park, No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC 北京市海淀区东北旺西路8号中关村软件园28号楼 邮编: 100193 Inactive hide details for "Stagneth, Andre" ---2012-05-11 17:57:36---Hello, "Stagneth, Andre" ---2012-05-11 17:57:36---Hello, "Stagneth, Andre" <andre.stagn...@hp.com> 2012-05-11 17:56 To xCAT Users Mailing list <xcat-user@list s.sourceforge.n Please respond to et> xCAT Users Mailing list <xcat-user@lists.sourcefo cc rge.net> Subject Re: [xcat-user] SLES11SP1 with SDK Hello, I tried it with original template /opt/xcat/share/xcat/install/sles/compute.sdk.sles11.tmpl without any modification. But it is still not working. How we must provide the sdk. Maybe my copycds was wrong. Thanks in advance André From: Guang Cheng Li [mailto:ligua...@cn.ibm.com] Sent: Freitag, 27. April 2012 03:05 To: xCAT Users Mailing list Cc: xCAT Users Mailing list Subject: Re: [xcat-user] SLES11SP1 with SDK The autoyast template file /opt/xcat/share/xcat/install/sles/compute.sdk.sles11.tmpl is the tested version that integrates the SDK image, you can use this template file or refer to this template file. Thanks, ------------------------------------------------------------------------- Li,Guang Cheng (李光成) IBM China System Technology Laboratory Email: ligua...@cn.ibm.com Address: Building 28, ZhongGuanCun Software Park, No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC 北京市海淀区东北旺西路8号中关村软件园28号楼 邮编: 100193 Inactive hide details for "Stagneth, Andre" ---2012-04-27 00:58:50---Hello, "Stagneth, Andre" ---2012-04-27 00:58:50---Hello, "Stagneth, Andre" <andre.stagn...@hp.com> 2012-04-27 00:56 To xCAT Users Mailing list <xcat-user@list s.sourceforge.n Please respond to et> xCAT Users Mailing list <xcat-user@lists.sourceforge.net cc > Subject [xcat-user] SLES11SP1 with SDK Hello, I am using xCat 2.7 to install SLES11SP1. This works well. But now I want to integrate the SDK. I enhanced my compute.tmpl (see below), the compute.pkglist is unchanged. During a new rinstall I get the Error: " The package resolver run failed. Please check your software section in the autoyast profile". After finishing the installation the repository is added to the installation (zypper sl), but no further packages are installed. What's wrong, who can help? Modification: <add-on> <add_on_products config:type="list"> <listentry> <media_url>http://172.19.3.200/install/sles11.1/x86_64/sdk1</media_url> <product>SuSE-Linux-SDK</product> <product_dir>/</product_dir> <ask_on_error config:type="boolean">false</ask_on_error> <name>SuSE-Linux-SDK</name> </listentry> </add_on_products> </add-on> Thanks André ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
<<inline: pic29390.gif>>
<<inline: ecblank.gif>>
<<inline: 18978231.gif>>
<<inline: 18772500.gif>>
------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user