Since you already ran updatenode, then everything in /tmp/wget.log and /var/log/xcat/xcat.log should already be right. Do we still have nodes that just finished the os installation and have not run updatenode? the /tmp/wget.log and /var/log/xcat/xcat.log should include useful hints.
Thanks, ------------------------------------------------------------------------- Li,Guang Cheng (李光成) IBM China System Technology Laboratory Email: ligua...@cn.ibm.com Address: Building 28, ZhongGuanCun Software Park, No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC 北京市海淀区东北旺西路8号中关村软件园28号楼 邮编: 100193 From: François Bissey <francois.bis...@canterbury.ac.nz> To: xcat-user@lists.sourceforge.net Date: 2012-07-26 06:37 Subject: Re: [xcat-user] postscript not run after install? On Wed, 25 Jul 2012 07:06:39 Lissa Valletta wrote: > In fact make sure all files in the /install/postscripts directory and > subdirectories are world readable. This can cause a failure that will > show up in the wget.log that Guang Cheng Li asked for below. > Thanks! > Ok I will give you a bit of what you want. Like I said "updatenode <mynode> -P" runs the postscripts normally so thses files are currently filled with the information coming from that run. If you need one from a virgin install I'll arrange that. /tmp/wget.log starts with: --2012-07-24 16:35:03-- ftp://192.168.14.116/post/otherpkgs/sles11.1/ppc64/loadl/*.rpm => `.listing' Connecting to 192.168.14.116:21... connected. Logging in as anonymous ... Logged in! ==> SYST ... done. ==> PWD ... done. ==> TYPE I ... done. ==> CWD /post/otherpkgs/sles11.1/ppc64/loadl ... done. ==> PASV ... done. ==> LIST ... done. 0K . 8.08M=0s 2012-07-24 16:35:03 (8.08 MB/s) - `.listing' saved [1313] Removed `.listing'. --2012-07-24 16:35:03-- ftp://192.168.14.116/post/otherpkgs/sles11.1/ppc64/loadl/IBMJava2-142-ppc64- JRE-1.4.2-5.0.ppc64.rpm => `IBMJava2-142-ppc64-JRE-1.4.2-5.0.ppc64.rpm' ==> CWD not required. ==> PASV ... done. ==> RETR IBMJava2-142-ppc64-JRE-1.4.2-5.0.ppc64.rpm ... done. Length: 46118362 (44M) 0K .......... .......... .......... .......... .......... 0% 48.4M 1s 50K .......... .......... .......... .......... .......... 0% 75.6M 1s 100K .......... .......... .......... .......... .......... 0% 89.3M 1s And I cannot see any report of failure in the file. Similarly /var/log/xcat/xcat.log goes like this: Running postscript: syslog Shutting down syslog services..done Starting syslog services..done Running postscript: remoteshell Starting SSH daemon..done Running postscript: syncfiles Did not sync any files. Use updatenode -F to sync the files. Running postscript: setupntp ntpd Shutting down network time protocol daemon (NTPD)..done ntpd: time slew +0.000960s Starting network time protocol daemon (NTPD)..done Running postscript: basic_setup Running postscript: IBMhpc.postscript if test -e /dev/cpuset || mkdir -p /dev/cpuset ; then mount -t cpuset none /dev/cpuset Running postscript: ge.create.fen Running postscript: usrlocalpower7 WARNING - failed to clear out /usr/local directory Running postscript: credential MASTER=192.168.14.116 SITEMASTER=192.168.14.116 MONMASTER=192.168.14.116 Loading repository data... Reading installed packages... 'krb5' is already installed. No update candidate for 'krb5'. Resolving package dependencies... The following NEW packages are going to be installed: krb5-client pam_krb5 2 new packages to install. Overall download size: 211.0 KiB. After the operation, additional 651.0 KiB will be used. Continue? [y/n/?] (y): y Retrieving package pam_krb5-2.3.1-47.10.15.ppc64 (1/2), 118.0 KiB (393.0 KiB unpacked) Retrieving: pam_krb5-2.3.1-47.10.15.ppc64.rpm [done] Installing: pam_krb5-2.3.1-47.10.15 [...done] Retrieving package krb5-client-1.6.3-133.27.1.ppc64 (2/2), 93.0 KiB (258.0 KiB unpacked) Retrieving: krb5-client-1.6.3-133.27.1.ppc64.rpm [done] Installing: krb5-client-1.6.3-133.27.1 [.done] finished setting up the credentials Running postscript: otherpkgs NFSSERVER=192.168.14.116 OTHERPKGDIR=192.168.14.116/post/otherpkgs/sles11.1/ppc64 Repository 'SUSE-Linux-Enterprise-Server-11-SP1 11.1.1-1.152' is up to date. Repository 'SuSE-Linux-SDK' is up to date. All repositories have been refreshed. zypper --non-interactive update --auto-agree-with-license Loading repository data... Reading installed packages... and so on. None of the postscripts involved fail to execute. Francois ------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/ _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
------------------------------------------------------------------------------ Live Security Virtual Conference Exclusive live event will cover all the ways today's security and threat landscape has changed and how IT managers can respond. Discussions will include endpoint security, mobile security and the latest in malware threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user