Did you try to deploy the rh or sles on this node? Thanks Best Regards ---------------------------------------------------------------------- Wang Xiaopeng (王晓朋) IBM China System Technology Laboratory Tel: 86-10-82453455 Email: [email protected] Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District Beijing P.R.China 100193
From: Adalberto Medeiros <[email protected]> To: [email protected], Date: 2013/03/08 04:33 Subject: Re: [xcat-user] Loading image hangs during pxe installation Hi! That's another issue I'm also having. The output console only gives me some Progress Code or strange characters, so I need to go over the graphic console to get the real information (but then I lose the log of what was done). Therefore, I'm not able get the init messages. root@tam:~# rcons derrial [Enter `^Ec?' for help] done Connection to bchmm closed. system> console -o -T blade[12] PROGRESS CODE: V11007 I0^M PROGRESS CODE: V3048005 I0^M ����������������������������������� Regards, Adalberto Medeiros Linux Technology Center Openstack and Cloud Development IBM Brazil Email: [email protected] On 07-03-2013 15:56, Russell Jones wrote: I see that you are using an Avocent, but you have a serial console configured for the node as well. Are there any additional init messages going over the serial console that show additional information? For RH/CentOS (and I am assuming Ubuntu here as well), init messages will be sent to the last terminal listed in your kernel command line. You have the serial port listed last. On 3/7/2013 11:59 AM, Adalberto Medeiros wrote: Hi! I'm trying to deploy Ubuntu in a few compute nodes. I have tried both pxe and xnba as netboot, in both cases I got the booting hanging at some part. For pxe, the compute node had the ip set by dhcp correctly and was able to download the necessary pxe files using tftp. It downloaded initrd.gz and vmlinuz and it started the installation process, hanging in the middle of it (see pic 1 attached). For xnba, it also hangs trying to download the elilo-x86.efi file, at 31% . I've tried that for different compute nodes and they had the same behavior (see pic 2). Log in the mn : Mar 6 13:54:43 tam in.tftpd[21959]: RRQ from 9.114.219.49 filename /xcat/elilo-x64.efi Mar 6 13:55:24 tam kernel: [2331921.456317] be2net 0000:16:00.1: Out of MCCQ wrbs After some time, it restarts the cn and try to pxe boot it again, but it gives me those messages in the mn (be2net Out of MCCQ wrbs, which looks like network issues). Any help or insights is appreciated! Here is my configuration. Bladecenter with HS23 blades (both mn and cn), with Ubuntu, trying to deploy ubuntu image (12.04.2). mn: tam cn: derrial root@tam:~# lsdef derrial Object name: derrial arch=x86_64 cons=blade currchain=boot currstate=install ubuntu12.04.2-x86_64-compute getmac=blade groups=compute,blade,all id=12 initrd=xcat/osimage/ubuntu12.04.2-x86_64-install-compute/initrd.img installnic=mac ip=9.114.219.51 kcmdline=nofb utf8 auto url= http://9.114.219.49/install/autoinst/derrial netcfg/choose_interface=a0:36:9f:07:20:18 console=tty0 console=ttyS1,19200n8r noipv6 locale=en_US console-setup/layoutcode=us priority=critical netcfg/dhcp_timeout=120 hostname=derrial kernel=xcat/osimage/ubuntu12.04.2-x86_64-install-compute/vmlinuz mac=a0:36:9f:07:20:18 mgt=blade mpa=bchmm netboot=xnba nfsserver=9.114.219.49 nodetype=osi,blade os=ubuntu12.04.2 postbootscripts=otherpkgs postscripts=syslog,remoteshell,syncfiles primarynic=eth0 profile=compute provmethod=ubuntu12.04.2-x86_64-install-compute serialflow=hard serialport=1 serialspeed=19200 status=powering-off statustime=03-06-2013 13:51:37 tftpserver=9.114.219.49 root@tam:~# ls /tftpboot/xcat/ elilo-x64.efi osimage pxelinux.0 xnba xnba.efi xnba.kpxe Best regards, -- Adalberto Medeiros Linux Technology Center Openstack and Cloud Development IBM Brazil Email: [email protected] ------------------------------------------------------------------------------ Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the endpoint security space. For insight on selecting the right partner to tackle endpoint security challenges, access the full report. http://p.sf.net/sfu/symantec-dev2dev _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the endpoint security space. For insight on selecting the right partner to tackle endpoint security challenges, access the full report. http://p.sf.net/sfu/symantec-dev2dev _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user ------------------------------------------------------------------------------ Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the endpoint security space. For insight on selecting the right partner to tackle endpoint security challenges, access the full report. http://p.sf.net/sfu/symantec-dev2dev _______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
<<inline: graycol.gif>>
------------------------------------------------------------------------------ Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the endpoint security space. For insight on selecting the right partner to tackle endpoint security challenges, access the full report. http://p.sf.net/sfu/symantec-dev2dev
_______________________________________________ xCAT-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcat-user
