Hi!
I'm currently running xcat 2.8-snap20130201 for ubuntu.
After the note I send, I tried to deploy the ubuntu image in a
HS22 in the same bladecenter and it worked using xnba. I'll give
it a shot with rhel on the HS23 and update the bladecenter
firmware to check if this behave changes.
Regards,
Adalberto Medeiros
Linux Technology Center
Openstack and Cloud Development
IBM Brazil
Email: [email protected]
On 08-03-2013 09:11, Lissa Valletta wrote:
Hi Adalberto , what level of xCAT are you
running?
Lissa K. Valletta
8-3/B10
Poughkeepsie, NY 12601
(tie 293) 433-3102
 Qing QQ Xu
---03/07/2013 09:44:34 PM---I had test installing ubuntu
12.04.2 on my test machine, did not met your problem. I think
you can t
From: Qing QQ Xu
<[email protected]>
To: xCAT Users Mailing list
<[email protected]>
Date: 03/07/2013 09:44 PM
Subject: Re: [xcat-user] Loading image hangs
during pxe installation
I had test installing ubuntu
12.04.2 on my test machine, did not met your problem. I think
you can try to provision redhat or sles first.
Best
--------------------------
Xu Qing (徐清)
IBM China Software Development Laboratory
Email: [email protected]
Address: Building 28, ZhongGuanCun Software Park,
No.8, Dong Bei Wang West Road, Haidian District Beijing
100193, PRC
北京市海淀区东北旺西路8号中关村软件园28号楼
邮编: 100193
Adalberto Medeiros
---03/08/2013 02:00:47 AM---Adalberto Medeiros
<[email protected]>
Hi!
I'm trying to deploy Ubuntu in a few compute nodes. I have tried
both pxe and xnba as netboot, in both cases I got the booting
hanging at some part.
For pxe, the compute node had the ip set by dhcp correctly and
was able to download the necessary pxe files using tftp. It
downloaded initrd.gz and vmlinuz and it started the installation
process, hanging in the middle of it (see pic 1 attached).
For xnba, it also hangs trying to download the elilo-x86.efi
file, at 31% . I've tried that for different compute nodes and
they had the same behavior (see pic 2).
Log in the mn :
Mar 6 13:54:43 tam in.tftpd[21959]: RRQ from 9.114.219.49
filename /xcat/elilo-x64.efi
Mar 6 13:55:24 tam kernel: [2331921.456317] be2net
0000:16:00.1: Out of MCCQ wrbs
After some time, it restarts the cn and try to pxe boot it
again, but it gives me those messages in the mn (be2net Out of
MCCQ wrbs, which looks like network issues).
Any help or insights is appreciated!
Here is my configuration.
Bladecenter with HS23 blades (both mn and cn), with Ubuntu,
trying to deploy ubuntu image (12.04.2).
mn: tam
cn: derrial
root@tam:~# lsdef derrial
Object name: derrial
arch=x86_64
cons=blade
currchain=boot
currstate=install ubuntu12.04.2-x86_64-compute
getmac=blade
groups=compute,blade,all
id=12
initrd=xcat/osimage/ubuntu12.04.2-x86_64-install-compute/initrd.img
installnic=mac
ip=9.114.219.51
kcmdline=nofb utf8 auto url="">http://9.114.219.49/install/autoinst/derrial netcfg/choose_interface=a0:36:9f:07:20:18
console=tty0 console=ttyS1,19200n8r noipv6 locale=en_US
console-setup/layoutcode=us priority=critical
netcfg/dhcp_timeout=120 hostname=derrial
kernel=xcat/osimage/ubuntu12.04.2-x86_64-install-compute/vmlinuz
mac=a0:36:9f:07:20:18
mgt=blade
mpa=bchmm
netboot=xnba
nfsserver=9.114.219.49
nodetype=osi,blade
os=ubuntu12.04.2
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles
primarynic=eth0
profile="">
provmethod=ubuntu12.04.2-x86_64-install-compute
serialflow=hard
serialport=1
serialspeed=19200
status=powering-off
statustime=03-06-2013 13:51:37
tftpserver=9.114.219.49
root@tam:~# ls /tftpboot/xcat/
elilo-x64.efi osimage pxelinux.0 xnba xnba.efi xnba.kpxe
Best regards,
--
Adalberto Medeiros
Linux Technology Center
Openstack and Cloud Development
IBM Brazil
Email: [email protected](See attached file:
xcat-xnba.png)(See attached file: xcat-pxe-hangs.png)------------------------------------------------------------------------------
Symantec Endpoint Protection 12 positioned as A LEADER in The
Forrester
Wave(TM): Endpoint Security, Q1 2013 and "remains a good
choice" in the
endpoint security space. For insight on selecting the right
partner to
tackle endpoint security challenges, access the full report.
http://p.sf.net/sfu/symantec-dev2dev_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
(See attached file: pic13142.gif)(See attached
file: xcat-xnba.png)(See attached file:
xcat-pxe-hangs.png)------------------------------------------------------------------------------
Symantec Endpoint Protection 12 positioned as A LEADER in The
Forrester
Wave(TM): Endpoint Security, Q1 2013 and "remains a good
choice" in the
endpoint security space. For insight on selecting the right
partner to
tackle endpoint security challenges, access the full report.
http://p.sf.net/sfu/symantec-dev2dev_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Symantec Endpoint Protection 12 positioned as A LEADER in The Forrester
Wave(TM): Endpoint Security, Q1 2013 and "remains a good choice" in the
endpoint security space. For insight on selecting the right partner to
tackle endpoint security challenges, access the full report.
http://p.sf.net/sfu/symantec-dev2dev
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
|
