So I put some breadcrumbs in the autoinst file and it seems like there's a section at the bottom where if NODESTATUS != 0, it will run the updateflag.awk to flip the node over to boot. I exported NODESTATUS right before that if statement is ran and it is 0. There's exports for NODESTATUS above that file that sets it to 0, and I am not seeing anywhere else where NODESTATUS could have the potential to be set to anything but 0.
Thoughts? On 2/25/2014 10:27 AM, Russell Jones wrote: > Sorry, just for clarification that's /var/log/messages on the node > showing those messages, not xcat.log. > > > On 2/25/2014 10:20 AM, Russell Jones wrote: >> Hi all, >> >> I have a strange issue with a CentOS 5 compute node that is in a >> reinstall loop. I've checked the usual things, such as DNS forward and >> reverse resolution, network configuration, etc, and the node should have >> no problem talking to it's servicenode/xcatmaster. >> >> I've forced the node to boot after an install and am trying to replicate >> running './updateflag.awk $MASTER 3002 "installstatus booted"' manually >> to see if it will flip itself over to boot per docs and other mailing >> list posts I've read. The xcat.log file on the node shows: >> >> xcat: ready >> xcat: done >> >> .... everytime I do that, however it still doesn't flip itself over to >> boot when I check "nodeset $node stat" on the xcatmaster. Neither the >> service node nor management node are logging anything when I do that. >> >> Any ideas on how I can dive further into this and see what's going >> wrong? Is there a better test to manually replicate the node telling >> it's master that it is done installing? >> >> Thanks! >> >> ------------------------------------------------------------------------------ >> Flow-based real-time traffic analytics software. Cisco certified tool. >> Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer >> Customize your own dashboards, set traffic alerts and generate reports. >> Network behavioral analysis & security monitoring. All-in-one tool. >> http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk >> _______________________________________________ >> xCAT-user mailing list >> xCAT-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/xcat-user >> > > ------------------------------------------------------------------------------ > Flow-based real-time traffic analytics software. Cisco certified tool. > Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer > Customize your own dashboards, set traffic alerts and generate reports. > Network behavioral analysis & security monitoring. All-in-one tool. > http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk > _______________________________________________ > xCAT-user mailing list > xCAT-user@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/xcat-user > ------------------------------------------------------------------------------ Flow-based real-time traffic analytics software. Cisco certified tool. Monitor traffic, SLAs, QoS, Medianet, WAAS etc. with NetFlow Analyzer Customize your own dashboards, set traffic alerts and generate reports. Network behavioral analysis & security monitoring. All-in-one tool. http://pubads.g.doubleclick.net/gampad/clk?id=126839071&iu=/4140/ostg.clktrk _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
