We are following through the quick start with new Cray cluster and we have
gotten stuck on checking the status of the node discovery. This is the error we
are receiving:
FATAL: Module ipmi_si not found.
FATAL: Module ipmi_si not found.
rm: cannot remove '/tmp/ipmicfg.xml':No such file or directory
/bin/bmcsetup: line 45: 2182 Terminated allowcred.awk
Auto detecting LAN channel...Detecting LAN channel 1
Setting LAN IP Address to 192.168.10.104
Setting LAN Subnet Mask to 255.255.255.0
Setting LAN Default Gateway IP to 192.168.10.1
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
