What level of xCAT do you have installed and what OS? I assume you are
following this doc:
https://sourceforge.net/p/xcat/wiki/XCAT_iDataPlex_Cluster_Quick_Start/
Our testing is done only on IBM/Lenovo x-series hardware. Maybe someone
in the user community might can help with the difference usually with the
hardware control setup on Cray. We do not formally support non-IBM/Lenovo
x-series hardware.
Lissa K. Valletta
8-3/B10
Poughkeepsie, NY 12601
(tie 293) 433-3102
From: Zoie Oberg <[email protected]>
To: "[email protected]"
<[email protected]>
Date: 09/22/2014 04:45 PM
Subject: Re: [xcat-user] bmcsetup Error
We are following through the quick start with new Cray cluster and we have
gotten stuck on checking the status of the node discovery. This is the
error we are receiving:
FATAL: Module ipmi_si not found.
FATAL: Module ipmi_si not found.
rm: cannot remove '/tmp/ipmicfg.xml':No such file or directory
/bin/bmcsetup: line 45: 2182 Terminated allowcred.awk
Auto detecting LAN channel...Detecting LAN channel 1
Setting LAN IP Address to 192.168.10.104
Setting LAN Subnet Mask to 255.255.255.0
Setting LAN Default Gateway IP to 192.168.10.1
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Access (channel 1 id 2) failed: Invalid data field in request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set User Name command failed (user 2, name ADMIN): Invalid data field in
request
Set up for following user table:
ID Name Callin Link Auth IPMI Msg Channel
Priv Limit
1 false false true
ADMINISTRATOR
2 root false true true
ADMINISTRATOR
3 test1 false false true
ADMINISTRATOR
4 test 2 false false true
ADMINISTRATOR
5 test 3 false false true
ADMINISTRATOR
Enabling Channel 1: OK
Enabling ARP response: OK
Enabling IPMI v 1.5 MD5 LAN access: OK
Enabling IPMI v 2.0 LAN access:OK
Enabling SOL for channel 1: OK
Enabling SOL for ADMIN :OK
Enabling SOL on channel 1:OK
Lighting Identify Light
Can anyone offer some guidance?
Thank you!
On Monday, September 22, 2014 1:32 PM, Zoie Oberg <[email protected]>
wrote:
We are following through the quick start with new Cray cluster and we have
gotten stuck on checking the status of the node discovery. This is the
error we are receiving:
FATAL: Module ipmi_si not found.
FATAL: Module ipmi_si not found.
rm: cannot remove '/tmp/ipmicfg.xml':No such file or directory
/bin/bmcsetup: line 45: 2182 Terminated allowcred.awk
Auto detecting LAN channel...Detecting LAN channel 1
Setting LAN IP Address to 192.168.10.104
Setting LAN Subnet Mask to 255.255.255.0
Setting LAN Default Gateway IP to 192.168.10.1
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
Set User Access (channel 1 in 2) failed: Invalid data field in request
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
