Thank you, Lissa.
Yes, lsdef output changed.. for bc2a2 (with password in mpa), it now
displays mentioned parameters,
but it didn't changed for bc2a1. I suppose it's expected?
But r-commands on bc2a2 still give "Authentication failure" messages...
Even though "rspconfig" was ran on bc2a2 before, another try resulted in:
rspconfig bc2a2 snmpcfg=enable
bc2a2: Incorrect Password at /opt/xcat/lib/perl/xCAT/SSHInteract.pm line 74.
Is it useful?
Thanks,
Michael
On Fri, Sep 26, 2014 at 11:43 AM, Lissa Valletta <[email protected]> wrote:
> I think the problem is the nodetype=mp, that is not valid.
> chdef bc2a1 nodetype=mm
> chdef bc2a2 nodetype=mm
>
> Then when you lsdef bc2a1, you should see the password and username
> displayed. Right now they are not being displayed
>
> For example:
>
> lsdef compute2
> Object name: compute2
> groups=mygroup2
> hwtype=mm
> id=0
> mgt=blade
> nodetype=mm
> * password=password1*
> postbootscripts=otherpkgs
> postscripts=syslog,remoteshell,syncfiles
> * username=user1*
>
>
> Lissa K. Valletta
> 8-3/B10
> Poughkeepsie, NY 12601
> (tie 293) 433-3102
>
>
>
> [image: Inactive hide details for Mikhail Bugaev ---09/26/2014 10:29:53
> AM---I'm afraid it was before 2.7.x... Would it be a problem? C]Mikhail
> Bugaev ---09/26/2014 10:29:53 AM---I'm afraid it was before 2.7.x... Would
> it be a problem? Currently (on 2.8.5) outputs are:
>
> From: Mikhail Bugaev <[email protected]>
> To: xCAT Users Mailing list <[email protected]>
> Date: 09/26/2014 10:29 AM
>
> Subject: Re: [xcat-user] mpa table handling in xCAT 2.8.5
> ------------------------------
>
>
>
> I'm afraid it was before 2.7.x... Would it be a problem?
> Currently (on 2.8.5) outputs are:
>
> lsdef bc2a1
> Object name: bc2a1
> groups=mm,all
> hwtype=mm
> id=0
> mgt=blade
> mpa=bc2a1
> nodetype=mp
> postbootscripts=otherpkgs
> postscripts=syslog,remoteshell,syncfiles
>
> lsdef bc2a2
> Object name: bc2a2
> groups=mm,all
> hwtype=mm
> id=0
> mgt=blade
> mpa=bc2a2
> nodetype=mp
> postbootscripts=otherpkgs
> postscripts=syslog,remoteshell,syncfiles
>
> passwd:
> ....
> "blade","adminuser","<one-password>",,,,
> ....
>
> mpa:
> ...
> "bc2a2","adminuser","<another-password>",,,,,
> ....
>
> Thanks for looking into this.
> Regards,
> Michael
>
> On Fri, Sep 26, 2014 at 9:58 AM, Lissa Valletta <*[email protected]*
> <[email protected]>> wrote:
>
> xcatdebug is mostly used for xCAT development.
>
> Do you remember if you were on 2.8.X before or 2.7.X or an even
> earlier version of xCAT.
> Could you give us the following output, when you have put it back to
> where it was working before.
>
> lsdef bc2a1
> lsdef bc2a2
>
> tabdump passwd
> tabdump mpa
>
> Lissa K. Valletta
> 8-3/B10
> Poughkeepsie, NY 12601
> (tie 293) 433-3102
>
>
>
> [image: Inactive hide details for Mikhail Bugaev ---09/26/2014
> 09:45:14 AM---Hi, Thanks for your reply.]Mikhail Bugaev ---09/26/2014
> 09:45:14 AM---Hi, Thanks for your reply.
>
> From: Mikhail Bugaev <*[email protected]* <[email protected]>>
> To: xCAT Users Mailing list <*[email protected]*
> <[email protected]>>
> Date: 09/26/2014 09:45 AM
> Subject: Re: [xcat-user] mpa table handling in xCAT 2.8.5
>
>
> ------------------------------
>
>
>
> Hi,
>
> Thanks for your reply.
> Right, I didn't change anything for blades.
> Here is what happening:
> there are two BladeCenter chassis, configured identically except of
> course name, IP address AND user's password,
> say, bc2a1 and bc2a2. Password for bc2a1 is in passwd table (as
> default, in "blade" line), password for bc2a2 is in mpa table.
> r-commands (rscan, rinv, rpower, etc.) work fine for bc2a1, but don't
> for bc2a2 resulting in message "Authentication failure (incorrect password,
> community or key)". Changing line in passwd table with password for bc2a2
> makes r-command work, but obviously they stop working for bc2a1.
> Sorry, I don't remember the exact version of xCAT this setup was
> working... Probably it just misconfiguration..
> Can you suggest how I could troubleshot this? Unfortunately "xcatdebug
> -f enable" produces a huge file when just executing "rscan" command, do you
> know how I can narrow it down for this particular case?
>
> Thanks for your time,
> Regards,
> Michael
>
>
> On Fri, Sep 26, 2014 at 12:52 AM, Xiao Peng Wang <*[email protected]*
> <[email protected]>> wrote:
> No, we did not make any change in the usage of mpa table.
>
> Show me more of your issue. You did not change any thing for your
> blade node after xcat update, right? If you did , check the changes.
>
> Thanks
> Best Regards
>
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: *[email protected]* <[email protected]>
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West
> Road, Haidian District Beijing P.R.China 100193
>
> [image: Inactive hide details for Mikhail Bugaev ---2014/09/26
> 02:04:57---Hello All, Sorry to bother, but I was wondering if mpa
> table]Mikhail
> Bugaev ---2014/09/26 02:04:57---Hello All, Sorry to bother, but I was
> wondering if mpa table handling has changed from
>
> From: Mikhail Bugaev <*[email protected]* <[email protected]>>
> To: xCAT <*[email protected]*
> <[email protected]>>
> Date: 2014/09/26 02:04
> Subject: [xcat-user] mpa table handling in xCAT 2.8.5
> ------------------------------
>
>
>
>
> Hello All,
>
> Sorry to bother, but I was wondering if mpa table handling has
> changed from previous versions of xCAT?
> According to documentation, if there is an entry in mpa table,
> that's what is used instead of default settings in passwd table. And
> that
> worked fine a couple of versions back of xCAT on mixture of BladeCenter
> Management Modules with different userid/passwords.
> In version 2.8.5 it doesn't for some reason. Is it something
> related to format (new?) of passwd, mp, mpa tables and what was just
> misconfigured? Or something else?
>
> Would appreciate any insights on this.
>
> Thank you in advance,
> Regards,
> Michael
>
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS
> Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS
> Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS
> Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
>
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS
> Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
>
> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
>
> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
------------------------------------------------------------------------------
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
