Could you run 'xcatconfig -i -c -s' (Note, this command will re-initialize
some things in xCAT) and to see whether it can finish smoothly?
Thanks
Best Regards
----------------------------------------------------------------------
Wang Xiaopeng (王晓朋)
IBM China System Technology Laboratory
Tel: 86-10-82453455
Email: [email protected]
Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
Haidian District Beijing P.R.China 100193
From: Dennis Zheleznyak <[email protected]>
To: Lissa Valletta <[email protected]>, xCAT Users Mailing list
<[email protected]>
Date: 2015/01/10 03:04
Subject: Re: [xcat-user] Stuck on installation - CentOS 6.6
The issue is not yet resolved, the installation process is stuck when
installing xCAT-2.9-snap201412080202.x86_64.
The only way to stop it is to hit Ctrl + C, once I've done that I got the
following message:
^CError in POSTIN scriptlet in rpm package xCAT-2.9-snap201412080202.x86_64
Generating new node hostkeys...
Generating SSH1 RSA Key...
Generating SSH2 RSA Key...
Generating SSH2 DSA Key...
Added updates to the /root/.ssh/config file.
Copied /root/.ssh/id_rsa.pub to /install/postscripts/_ssh/authorized_keys.
error: %post(xCAT-2.9-snap201412080202.x86_64) scriptlet failed, signal 2
The OS I'm using is CentOS 6.6 with the stock kernel.
Thank you,
Dennis.
On Wed, Nov 19, 2014 at 10:51 PM, Dennis Zheleznyak <[email protected]>
wrote:
The installation process stopped at and the only thing that can be done
is to stop it by ctrl + c, otherwise it'll stay that way forever:
Installing : xCAT-2.8.5-snap201409010230.x86_64
No errors in any log.
I tried to install it as I installed in on CentOS 6.5, same steps and
same method.
Usually I install it on a simple SuperMicro server, however, I try it on
VirtualBox first(as I did with the previous versions).
Thank you,
Dennis.
Thank you,
Dennis.
On Wed, Nov 19, 2014 at 1:48 PM, Lissa Valletta <[email protected]>
wrote:
You are correct we don't support Centos6 until our next release but I am
surprised the install failed.
Did you get an errors on the yum install xCAT. Where did it stop an
yum install. You do not have a properly install xcat unless
yum finishes and xcatd is up and running and you can use lsxcatd -a to
display data.
Need to go back to the yum install.
Maybe run yum clean metadata or yum clean all and then
yum install xCAT again.
You will get the below error as long as you can not service xcatd
start successfully.
What hardware are you using.
Lissa K. Valletta
8-3/B10
Poughkeepsie, NY 12601
(tie 293) 433-3102
Inactive hide details for Alex Landsberg ---11/18/2014 06:14:28 PM---Hi
Dennis, Operating systems supported for xCAT 2.8.5Alex Landsberg
---11/18/2014 06:14:28 PM---Hi Dennis, Operating systems supported for
xCAT 2.8.5
From: Alex Landsberg <[email protected]>
To: Dennis Zheleznyak <[email protected]>
Cc: xCAT Users Mailing list <[email protected]>
Date: 11/18/2014 06:14 PM
Subject: Re: [xcat-user] Stuck on installation - CentOS 6.6
Hi Dennis,
Operating systems supported for xCAT 2.8.5
Operating systems verified with this xCAT release:
RHELS 6.5
RHELS 7.0
SLES 11.3
Ubuntu 14.04 bug 4214.
AIX 7100-03-02
AIX 7100-03-03
Redhat/CentOS 6.6 does not appear on the list.
Regards,
Alex
On Tue, Nov 18, 2014 at 5:48 PM, Dennis Zheleznyak <[email protected]
> wrote:
Hi,
On the latest kernel of CentOS 6.6 (2.6.32-504.1.3.el6.x86_64),
the installation process is stuck at yum install xCAT. (SELinux
and Iptables are turned off).
Files downloaded:
xcat-core-2.8.5.tar.bz2
xcat-dep-201411140402.tar.bz2
Progress:
Installing : xCAT-2.8.5-snap201409010230.x86_64
Steps to reproduce:
1. mkdir /install/downloads -p
2. cd /install/downloads
3. tar xvf xcat-core-2.8.5.tar.bz2
4. tar xvf xcat-dep-201411140402.tar.bz2
5. cd xcat-core && ./mklocalrepo.sh &&
cd ../xcat-dep/rh6/x86_64/&& ./mklocalrepo.sh
6. yum install xCAT
When I hit ctrl+c, i tried to start xcatd service but it could not
be started, in addition, when trying to run any xcat's command, i
get the following error:
Unable to open socket connection to xcatd daemon on
localhost:3001.
Verify that the xcatd daemon is running and that your SSL
setup is correct.
Connection failure: IO::Socket::INET: connect: Connection
refused at /opt/xcat/lib/perl/xCAT/Client.pm line 217.
Thank you,
Dennis.
--
Alex Landsberg
Eshkol Computer Systems Ltd.
+972-54-4825266
------------------------------------------------------------------------------
Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
from Actuate! Instantly Supercharge Your Business Reports and Dashboards
with Interactivity, Sharing, Native Excel Exports, App Integration &
more
Get technology previously reserved for billion-dollar corporations, FREE
http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Dive into the World of Parallel Programming! The Go Parallel Website,
sponsored by Intel and developed in partnership with Slashdot Media, is
your
hub for all things parallel software development, from weekly thought
leadership blogs to news, videos, case studies, tutorials and more. Take a
look and join the conversation now. http://goparallel.sourceforge.net
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
vanity: www.gigenet.com
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
