Hi again,
Thank you for the response :)
I'm adding a text file with the output of the command you provided. After I
ran the command, I tried restarting xcat service but I'm still getting the
same error message:
[root@master ~]# service xcatd restart
> Restarting xCATd ERROR:Need xcatdport defined in site table, try chtab
> key=xcatdport site.value=3001
> Died at /opt/xcat/sbin/xcatd line 183.
> [FAILED]
Thank you !
Dennis.
On Mon, Jan 12, 2015 at 3:55 AM, Xiao Peng Wang <[email protected]> wrote:
> Could you run 'xcatconfig -i -c -s' (Note, this command will re-initialize
> some things in xCAT) and to see whether it can finish smoothly?
>
> Thanks
> Best Regards
> ----------------------------------------------------------------------
> Wang Xiaopeng (王晓朋)
> IBM China System Technology Laboratory
> Tel: 86-10-82453455
> Email: [email protected]
> Address: 28,ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road,
> Haidian District Beijing P.R.China 100193
>
> [image: Inactive hide details for Dennis Zheleznyak ---2015/01/10
> 03:04:48---The issue is not yet resolved, the installation process is]Dennis
> Zheleznyak ---2015/01/10 03:04:48---The issue is not yet resolved, the
> installation process is stuck when installing xCAT-2.9-snap201412
>
> From: Dennis Zheleznyak <[email protected]>
> To: Lissa Valletta <[email protected]>, xCAT Users Mailing list <
> [email protected]>
> Date: 2015/01/10 03:04
>
> Subject: Re: [xcat-user] Stuck on installation - CentOS 6.6
> ------------------------------
>
>
>
> The issue is not yet resolved, the installation process is stuck when
> installing xCAT-2.9-snap201412080202.x86_64.
> The only way to stop it is to hit Ctrl + C, once I've done that I got the
> following message:
>
> ^CError in POSTIN scriptlet in rpm package xCAT-2.9-snap201412080202.x86_64
> Generating new node hostkeys...
> Generating SSH1 RSA Key...
> Generating SSH2 RSA Key...
> Generating SSH2 DSA Key...
> Added updates to the /root/.ssh/config file.
> Copied /root/.ssh/id_rsa.pub to /install/postscripts/_ssh/authorized_keys.
> error: %post(xCAT-2.9-snap201412080202.x86_64) scriptlet failed, signal 2
>
> The OS I'm using is CentOS 6.6 with the stock kernel.
>
> Thank you,
> Dennis.
>
> On Wed, Nov 19, 2014 at 10:51 PM, Dennis Zheleznyak <
> *[email protected]* <[email protected]>> wrote:
>
> The installation process stopped at and the only thing that can be
> done is to stop it by ctrl + c, otherwise it'll stay that way forever:
> Installing : xCAT-2.8.5-snap201409010230.x86_64
>
> No errors in any log.
>
> I tried to install it as I installed in on CentOS 6.5, same steps and
> same method.
> Usually I install it on a simple SuperMicro server, however, I try it
> on VirtualBox first(as I did with the previous versions).
>
> Thank you,
> Dennis.
>
> Thank you,
> Dennis.
>
> On Wed, Nov 19, 2014 at 1:48 PM, Lissa Valletta <*[email protected]*
> <[email protected]>> wrote:
> You are correct we don't support Centos6 until our next release but
> I am surprised the install failed.
>
> Did you get an errors on the yum install xCAT. Where did it stop
> an yum install. You do not have a properly install xcat unless
> yum finishes and xcatd is up and running and you can use lsxcatd
> -a to display data.
>
> Need to go back to the yum install.
>
> Maybe run yum clean metadata or yum clean all and then
> yum install xCAT again.
>
> You will get the below error as long as you can not service
> xcatd start successfully.
>
> What hardware are you using.
>
>
>
>
> Lissa K. Valletta
> 8-3/B10
> Poughkeepsie, NY 12601
> (tie 293) 433-3102
>
>
>
> [image: Inactive hide details for Alex Landsberg ---11/18/2014
> 06:14:28 PM---Hi Dennis, Operating systems supported for xCAT 2.8.5]Alex
> Landsberg ---11/18/2014 06:14:28 PM---Hi Dennis, Operating systems
> supported for xCAT 2.8.5
>
> From: Alex Landsberg <*[email protected]*
> <[email protected]>>
> To: Dennis Zheleznyak <*[email protected]* <[email protected]>
> >
> Cc: xCAT Users Mailing list <*[email protected]*
> <[email protected]>>
> Date: 11/18/2014 06:14 PM
> Subject: Re: [xcat-user] Stuck on installation - CentOS 6.6
> ------------------------------
>
>
>
>
>
> Hi Dennis,
>
> Operating systems supported for xCAT 2.8.5
> - Operating systems verified with this xCAT release:
> - RHELS 6.5
> - RHELS 7.0
> - SLES 11.3
> - Ubuntu 14.04 *bug 4214*
> <https://sourceforge.net/p/xcat/bugs/4214>.
> - AIX 7100-03-02
> - AIX 7100-03-03
> Redhat/CentOS 6.6 does not appear on the list.
>
> Regards,
> Alex
>
> On Tue, Nov 18, 2014 at 5:48 PM, Dennis Zheleznyak <
> *[email protected]* <[email protected]>> wrote:
> Hi,
>
> On the latest kernel of CentOS 6.6 (2.6.32-504.1.3.el6.x86_64),
> the installation process is stuck at yum install xCAT. (SELinux and
> Iptables are turned off).
>
> * Files downloaded:*
> xcat-core-2.8.5.tar.bz2
> xcat-dep-201411140402.tar.bz2
>
> * Progress:*
> Installing : xCAT-2.8.5-snap201409010230.x86_64
>
> * Steps to reproduce:*
> 1. mkdir /install/downloads -p
> 2. cd /install/downloads
> 3. tar xvf xcat-core-2.8.5.tar.bz2
> 4. tar xvf xcat-dep-201411140402.tar.bz2
> 5. cd xcat-core && ./mklocalrepo.sh && cd
> ../xcat-dep/rh6/x86_64/&& ./mklocalrepo.sh
> 6. yum install xCAT
>
> When I hit ctrl+c, i tried to start xcatd service but it could
> not be started, in addition, when trying to run any xcat's command,
> i get
> the following error:
> Unable to open socket connection to xcatd daemon on
> localhost:3001.
> Verify that the xcatd daemon is running and that your SSL
> setup is correct.
> Connection failure: IO::Socket::INET: connect: Connection
> refused at /opt/xcat/lib/perl/xCAT/Client.pm line 217.
>
>
> Thank you,
> Dennis.
>
>
>
> --
>
> * Alex Landsberg Eshkol Computer Systems Ltd.*
> *+972-54-4825266* <%2B972-54-4825266>
>
> ------------------------------------------------------------------------------
> Download BIRT iHub F-Type - The Free Enterprise-Grade BIRT Server
> from Actuate! Instantly Supercharge Your Business Reports and
> Dashboards
> with Interactivity, Sharing, Native Excel Exports, App Integration
> & more
> Get technology previously reserved for billion-dollar corporations,
> FREE
>
>
> *http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk*
>
> <http://pubads.g.doubleclick.net/gampad/clk?id=157005751&iu=/4140/ostg.clktrk>
> _______________________________________________
> xCAT-user mailing list
> *[email protected]* <[email protected]>
> *https://lists.sourceforge.net/lists/listinfo/xcat-user*
> <https://lists.sourceforge.net/lists/listinfo/xcat-user>
>
>
>
> ------------------------------------------------------------------------------
> Dive into the World of Parallel Programming! The Go Parallel Website,
> sponsored by Intel and developed in partnership with Slashdot Media, is
> your
> hub for all things parallel software development, from weekly thought
> leadership blogs to news, videos, case studies, tutorials and more. Take a
> look and join the conversation now. http://goparallel.sourceforge.net
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
>
> ------------------------------------------------------------------------------
> New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
> GigeNET is offering a free month of service with a new server in Ashburn.
> Choose from 2 high performing configs, both with 100TB of bandwidth.
> Higher redundancy.Lower latency.Increased capacity.Completely compliant.
> vanity: www.gigenet.com
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
>
[root@master ~]# xcatconfig -i -c -s
Generating new node hostkeys...
Generating SSH1 RSA Key...
Generating SSH2 RSA Key...
Generating SSH2 DSA Key...
Copied /root/.ssh/id_rsa.pub to /install/postscripts/_ssh/authorized_keys.
Setting up basic certificates. Respond with a 'y' when prompted.
# NOTE use "-newkey rsa:2048" if running OpenSSL 0.9.8a or higher
Generating RSA private key, 2048 bit long modulus
................................+++
.....+++
e is 65537 (0x10001)
Using configuration from openssl.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
Serial Number: 1 (0x1)
Validity
Not Before: Jan 1 01:01:01 1970 GMT
Not After : Jan 13 02:30:08 2035 GMT
Subject:
commonName = xCAT CA
X509v3 extensions:
X509v3 Subject Key Identifier:
C1:96:E4:1D:99:39:DB:25:7D:63:28:69:8E:A2:96:ED:39:57:FE:33
X509v3 Authority Key Identifier:
keyid:C1:96:E4:1D:99:39:DB:25:7D:63:28:69:8E:A2:96:ED:39:57:FE:33
DirName:/CN=xCAT CA
serial:01
X509v3 Basic Constraints:
CA:TRUE
X509v3 Key Usage:
Certificate Sign, CRL Sign
Netscape Cert Type:
SSL CA, S/MIME CA
Certificate is to be certified until Jan 13 02:30:08 2035 GMT (7305 days)
Sign the certificate? [y/n]:
1 out of 1 certificate requests certified, commit? [y/n]Write out database with
1 new entries
Data Base Updated
/root
Created xCAT certificate.
Generating RSA private key, 2048 bit long modulus
..............................................+++
..................+++
e is 65537 (0x10001)
/root
Using configuration from openssl.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
Serial Number: 2 (0x2)
Validity
Not Before: Jan 1 01:01:01 1960 GMT
Not After : Jan 8 02:30:08 2035 GMT
Subject:
commonName = master.parallel
X509v3 extensions:
X509v3 Basic Constraints:
CA:FALSE
Netscape Cert Type:
SSL Client, SSL Server, Object Signing
Netscape Comment:
OpenSSL Generated Server Certificate
X509v3 Subject Key Identifier:
84:AE:95:7A:00:BE:0F:A7:0D:20:63:28:40:48:4E:9D:6F:DC:76:A3
X509v3 Authority Key Identifier:
keyid:C1:96:E4:1D:99:39:DB:25:7D:63:28:69:8E:A2:96:ED:39:57:FE:33
X509v3 Key Usage:
Digital Signature, Key Encipherment, Key Agreement
X509v3 Extended Key Usage:
TLS Web Server Authentication, TLS Web Client Authentication
Certificate is to be certified until Jan 8 02:30:08 2035 GMT (7300 days)
Sign the certificate? [y/n]:
1 out of 1 certificate requests certified, commit? [y/n]Write out database with
1 new entries
Data Base Updated
/root
Created xCAT certificate.
Generating RSA private key, 2048 bit long modulus
..+++
................+++
e is 65537 (0x10001)
/root
Using configuration from openssl.cnf
Check that the request matches the signature
Signature ok
Certificate Details:
Serial Number: 3 (0x3)
Validity
Not Before: Jan 1 01:01:01 1960 GMT
Not After : Jan 8 02:30:09 2035 GMT
Subject:
commonName = root
X509v3 extensions:
X509v3 Basic Constraints:
CA:FALSE
X509v3 Key Usage:
Digital Signature, Key Encipherment, Key Agreement
X509v3 Extended Key Usage:
TLS Web Client Authentication
Netscape Cert Type:
SSL Client, S/MIME, Object Signing
Netscape Comment:
OpenSSL Generated Client Certificate
X509v3 Subject Key Identifier:
6A:F0:E8:FA:78:96:A7:EB:1C:D2:BE:B5:AD:7D:7A:80:47:2A:82:1B
X509v3 Authority Key Identifier:
keyid:C1:96:E4:1D:99:39:DB:25:7D:63:28:69:8E:A2:96:ED:39:57:FE:33
Certificate is to be certified until Jan 8 02:30:09 2035 GMT (7300 days)
Sign the certificate? [y/n]:
1 out of 1 certificate requests certified, commit? [y/n]Write out database with
1 new entries
Data Base Updated
/root
Created xCAT certificate.
dns server has been enabled on boot.
httpd has been restarted.
xCAT is now running, it is recommended to tabedit networks
and set a dynamic ip address range on any networks where nodes
are to be discovered. Then, run makedhcp -n to create a new dhcpd
configuration file, and /etc/init.d/dhcpd restart. Either examine sample
configuration templates, or write your own, or specify a value per
node with nodeadd or tabedit.
Running '/opt/xcat/sbin/mknb x86_64', triggered by the installation/update of
xCAT-genesis-scripts-x86_64 ...
Command failed: /opt/xcat/sbin/mknb x86_64 2>&1. Error message: Connection
failure: IO::Socket::INET: connect: Connection refused at
/opt/xcat/lib/perl/xCAT/Client.pm line 236.
Unable to open socket connection to xcatd daemon on localhost:3001.
Verify that the xcatd daemon is running and that your SSL setup is correct..
Unable to open socket connection to xcatd daemon on localhost:3001.
Verify that the xcatd daemon is running and that your SSL setup is correct.
Connection failure: IO::Socket::INET: connect: Connection refused at
/opt/xcat/lib/perl/xCAT/Client.pm line 236.
The 'mknb x86_64' command returned error code: 111.
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
