The output of lsdef for one of the nodes is below.
Everything else works here, the nodes boot, dhcp and install absolutely
fine. The only issue appears to be with rnetboot booting and setting the
boot order of a machine. If I do a nodeset followed by manually using SMS
to boot from the network then all works fine. The thing that doesn't work
is a nodeset followed by an rnetboot which just results in the box
rebooting to the Open Power firmware. So it seems rnetboot is able to
reboot the box to Open Power firmware but is then unable to send the
relevant commands to set the boot order and boot the machine.
Thanks,
Graham
Object name: node01
arch=ppc64
cons=hmc
currchain=boot
currstate=boot
groups=lpar,all,compute
hcp=etshmc01
hwtype=lpar
id=1
initrd=xcat/osimage/rhels7.0-ppc64-install-compute/initrd.img
installnic=mac
kcmdline=quiet inst.repo=http://!myipfn!:80/install/rhels7.0/ppc64
inst.ks=http://!myipfn!:80/install/autoinst/node01
BOOTIF=00:0a:f7:73:6d:30 ip=dhcp
kernel=xcat/osimage/rhels7.0-ppc64-install-compute/vmlinuz
mac=00:0a:f7:73:6d:30
mgt=hmc
netboot=grub2
nodetype=ppc,osi
os=rhels7.0
parent=cec01
postbootscripts=otherpkgs
postscripts=syslog,remoteshell,syncfiles,setupntp
pprofile=AA2Aprof1
primarynic=mac
profile=compute
provmethod=rhels7.0-ppc64-install-compute
status=booted
statustime=01-16-2015 15:24:00
updatestatus=synced
updatestatustime=01-16-2015 11:37:17
From: Ling Gao <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Date: 16/01/2015 20:27
Subject: Re: [xcat-user] rnetboot fails to install power 8 box
Can you show the output of lsdef <node>?
Does the node has correct mac address? Does dhcp setup correctly?
Ling
Ling Gao
Poughkeepsie Unix Development Lab
IBM Systems and Technology Group
Internal: T/L 293-5692
External: [email protected], 845-433-5692
"I never worry about the future. It comes soon enough." --- Albert
Einstein
From: Graham White <[email protected]>
To: [email protected]
Date: 01/16/2015 03:57 AM
Subject: [xcat-user] rnetboot fails to install power 8 box
It's been quite a few years since I last touched xCAT so hello again from
me!
rnetboot is failing to install my compute nodes, they are IBM Power 8 S822
boxes. The command appears to power the box successfully to the Open
Firmware prompt but is then unable to talk to or use the prompt to set the
box to network boot. It fails at "check for active console". If I view
the console I can see the Open Firmware prompt is displayed and if I hack
LparNetbootExp.pm such that the code gets past this point then it still
fails so looks to me like some sort of communication problem once the Open
Firmware prompt is reached.
I have the latest xCAT 2.9 from the sourceforge yum repo installed
(xCAT-2.9-snap201412080202.x86_64). My management server is x86 RHEL 6.5
and the compute nodes are Power RHEL 7.0.
Any hints for what I can check to get it going?
Thanks,
Graham
P.S.Verbose output of rnetboot follows...
rnetboot -V node01
lpar_netboot Status: List only ent adapters
lpar_netboot Status: -v (verbose debug) flag detected
lpar_netboot Status: -i (force immediate shutdown) flag detected
lpar_netboot Status: -d (debug) flag detected
node:node01
open port
spawn_id is 23268.
Connecting to the node01.
Connected.
Checking for power off.
Status: run_lssyscg : partition status : node01: Not Activated
####msg:node01: Not Activated#########
The lpar state is node01: Not Activated.
# Power off complete.
Power on the node01 to the Open Firmware.
Waiting for power on...
Check the node state again;
Status: run_lssyscg : partition status : node01: Starting
####msg:node01: Starting#########
The node state is node01: Starting.
Status: run_lssyscg : partition status : node01: Starting
####msg:node01: Starting#########
The node state is node01: Starting.
Status: run_lssyscg : partition status : node01: Running
####msg:node01: Running#########
The node state is node01: Running.
Status: run_lssyscg : partition status : node01: Running
####msg:node01: Running#########
The node state is node01: Running.
Status: run_lssyscg : partition status : node01: Running
####msg:node01: Running#########
The node state is node01: Running.
Status: run_lssyscg : partition status : node01: Open Firmware
####msg:node01: Open Firmware#########
The node state is node01: Open Firmware.
Power on complete.
Check for active console.
Timeout waiting for ok prompt; exiting.
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
Unless stated otherwise above:
IBM United Kingdom Limited - Registered in England and Wales with number
741598.
Registered office: PO Box 41, North Harbour, Portsmouth, Hampshire PO6 3AU
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user