Damir,
I can think of 3 troubleshooting routes:
1. Load factory defaults, boot the system to the genesis kernel (nodeset NODE
shell) and run bmcsetup
2. Pull power from the box and plug it back in to reboot the IMM.
3. Create Bootable Media Creator thumb drive and force it to flash the IMM.
If none of that works, you might need to open a service call to replace the
system board. Pull a DSA because they'll probably ask for it.
Regards,
Christian Caruthers
Senior Consultant - System x Linux HPC
Mobile: 757-289-9872
From: Damir Krstic [mailto:[email protected]]
Sent: Wednesday, April 15, 2015 2:22 PM
To: xCAT Users Mailing list
Subject: [xcat-user] problem with bmc programming
one of our new nodes was just provisioned and I am having an issue programming
bmc. we are using dedicated imm port on this 3650m4 server. imm port is
plugged in to a switch with single vlan.
imm interface is configured with following settings:
IP Address Source : Static Address
IP Address : 172.29.9.1
Subnet Mask : 255.255.0.0
MAC Address : 40:f2:e9:cd:bf:df
SNMP Community String : public
Here is the picture of the actual imm settings in the uefi
i can't ping/telnet this interface at all. tcpdump basically shows me that the
management node is asking who has the mac address of this node. i have logged
in to the switch itself and this mac is not showing in the mac table on the
switch.
other interfaces (non imm) that are configured on this server and plugged in to
the same switch function properly and are accessible with ssh/telnet etc.
any help is appreciated.
damir
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
