Christian I'll try you suggestions. Thanks.
Daniel switch does not show anything connected to that port.
Damir
On Fri, Apr 17, 2015 at 04:31 Daniel Letai <[email protected]> wrote:
> What does the switch shows as connected to that port?
>
> On Thu, Apr 16, 2015 at 10:12 PM, Christian Caruthers
> <[email protected]> wrote:
> > Damir,
> >
> >
> >
> > I can think of 3 troubleshooting routes:
> >
> >
> >
> > 1. Load factory defaults, boot the system to the genesis kernel (nodeset
> > NODE shell) and run bmcsetup
> >
> > 2. Pull power from the box and plug it back in to reboot the IMM.
> >
> > 3. Create Bootable Media Creator thumb drive and force it to flash the
> IMM.
> >
> >
> >
> > If none of that works, you might need to open a service call to replace
> the
> > system board. Pull a DSA because they'll probably ask for it.
> >
> >
> >
> > Regards,
> > Christian Caruthers
> > Senior Consultant - System x Linux HPC
> > Mobile: 757-289-9872
> >
> >
> >
> > From: Damir Krstic [mailto:[email protected]]
> > Sent: Wednesday, April 15, 2015 2:22 PM
> > To: xCAT Users Mailing list
> > Subject: [xcat-user] problem with bmc programming
> >
> >
> >
> > one of our new nodes was just provisioned and I am having an issue
> > programming bmc. we are using dedicated imm port on this 3650m4 server.
> > imm port is plugged in to a switch with single vlan.
> >
> >
> >
> > imm interface is configured with following settings:
> >
> > IP Address Source : Static Address
> >
> > IP Address : 172.29.9.1
> >
> > Subnet Mask : 255.255.0.0
> >
> > MAC Address : 40:f2:e9:cd:bf:df
> >
> > SNMP Community String : public
> >
> > Here is the picture of the actual imm settings in the uefi
> >
> >
> >
> > i can't ping/telnet this interface at all. tcpdump basically shows me
> that
> > the management node is asking who has the mac address of this node. i
> have
> > logged in to the switch itself and this mac is not showing in the mac
> table
> > on the switch.
> >
> > other interfaces (non imm) that are configured on this server and
> plugged in
> > to the same switch function properly and are accessible with ssh/telnet
> etc.
> >
> > any help is appreciated.
> >
> > damir
> >
> >
> >
> ------------------------------------------------------------------------------
> > BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> > Develop your own process in accordance with the BPMN 2 standard
> > Learn Process modeling best practices with Bonita BPM through live
> exercises
> > http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-
> event?utm_
> > source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> > _______________________________________________
> > xCAT-user mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/xcat-user
> >
>
>
> ------------------------------------------------------------------------------
> BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
> Develop your own process in accordance with the BPMN 2 standard
> Learn Process modeling best practices with Bonita BPM through live
> exercises
> http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual-
> event?utm_
> source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
> _______________________________________________
> xCAT-user mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/xcat-user
>
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
