Hi:
For better performance, nodeset will not add kcmdline and initrd to node
definition any more.
But you can find those in the /tftpboot/petitboot/nodename after ran
nodeset command.
Thanks,
Casandra
...................................................................
Casandra Hong Qiu
Phone: (845) 433-9291, t/l 293-9291
Office: Building 8, 3-B-04
[email protected]
From: "J. Smith" <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Date: 07/20/2017 05:48 PM
Subject: [xcat-user] Issue when running nodeset - kcmdline & initrd not
set using xcat 2.13 and CentOS7
Hello,
I have installed a new version of xcat v2.13 on CentOS7 and have migrated
my xcat tables from another xcat server that was running CentOS6 with xcat
2.9
The migrated data looks fine but when adding new nodes, I see some
incomplete information after I run nodeset. For instance on node 113 there
is no information set on kcmdline & initrd. Information copied over from
xcatdump for node 102 looks fine.
Does anyone has any suggestions?
New Environment Information:
2 Managements Nodes set for HA using GPFS to share the xCAT data and I use
a VIP Interface to bring up xcat services.
Virtual IP Alias Address: xcatmn 192.168.248.60
Primary Management Node: ms1 192.168.248.61
Secondary Management Node: ms2 192.168.248.62
[[hpcslurm01]root@ms1 x86_64]# lsxcatd -v
Version 2.13.3 (git commit 7f9e0b57554c3a1975b83308935b7d183c632a9d, built
Thu Apr 13 01:56:07 EDT 2017)
CentOS 7
Linux ms1 3.10.0-229.el7.x86_64
[[hpcslurm01]root@ms1 x86_64]# lsdef -t site -l
Object name: clustersite
SNsyncfiledir=/var/xcat/syncfiles
auditnosyslog=0
auditskipcmds=ALL
blademaxp=64
cleanupxcatpost=no
consoleondemand=no
databaseloc=/var/lib
db2installloc=/mntdb2
dhcpinterfaces=em3:0
dhcplease=43200
dnshandler=ddns
domain=panther.net
enableASMI=no
forwarders=131.94.205.10,131.94.7.220
fsptimeout=0
installdir=/install
ipmimaxp=64
ipmiretries=3
ipmitimeout=2
master=192.168.248.60
maxssh=8
nameservers=192.168.248.61,192.168.248.62
nodesyncfiledir=/var/xcat/node/syncfiles
ntpservers=ms1,ms2
powerinterval=0
ppcmaxp=64
ppcretry=3
ppctimeout=0
sharedtftp=1
sshbetweennodes=ALLGROUPS
syspowerinterval=0
tftpdir=/tftpboot
timezone=America/New_York
useNmapfromMN=no
vsftp=n
xcatconfdir=/etc/xcat
xcatdport=3001
xcatiport=3002
xcatsslversion=TLSv1
Migrated data for node 102 looks fine:
[[hpcslurm01]root@ms1 x86_64]# lsdef n102
Object name: n102
arch=x86_64
bmc=r102
currstate=netboot centos6.5-x86_64-panther-pec6220
groups=panther-pem420,dell
hostnames=n102
initrd=xcat/osimage/centos6.5-x86_64-netboot-panther-pec6220/initrd-stateless.gz
installnic=em1
ip=192.168.248.142
kcmdline=imgurl=
http://xcatmn:80//install/netboot/centos6.5/x86_64/panther-pec6220/rootimg.gz
XCAT=xcatmn:3001 NODE=n102 FC=0 ifname=em1:F8:CA:B8:A9:0E:04 netdev=em1
console=tty0 console=ttyS0,115200
kernel=xcat/osimage/centos6.5-x86_64-netboot-panther-pec6220/kernel
mac=F8:CA:B8:A9:0E:04
mgt=ipmi
netboot=pxe
os=centos6.5
postscripts=syslog,remoteshell,otherpkgs,syncfiles,panther-bondtrunknics,panther-ldap,panther-nouserlogin,panther-engineerlicense,panther-resolv,panther-yumrepo-centos65,panther-rpms,panther-mlnx-ofed,panther-upgradegpfs-diskless-4.2.1-2,panther-setupgpfs,panther-lsf
power=impi
primarynic=em1
profile=panther-pec6220
provmethod=centos6.5-x86_64-netboot-panther-pec6220
serialport=0
serialspeed=115200
status=booted
statustime=02-08-2017 16:57:05
updatestatus=synced
updatestatustime=03-30-2017 17:15:00
xcatmaster=xcatmn
New added node 113 is not setup properly, there is no information set on
kcmdline & initrd
[[hpcslurm01]root@ms1 x86_64]# lsdef n113
Object name: n113
arch=x86_64
bmc=r113
currstate=netboot centos6.5-x86_64-panther-pec6220
groups=panther-pem420,dell
hostnames=n113
installnic=em1
ip=192.168.248.153
mac=48:4D:7E:81:F2:93
mgt=ipmi
netboot=pxe
os=centos6.5
postscripts=syslog,remoteshell,otherpkgs,syncfiles,panther-bondtrunknics,panther-ldap,panther-nouserlogin,panther-engineerlicense,panther-resolv,panther-yumrepo-centos65,panther-rpms,panther-mlnx-ofed,panther-upgradegpfs-diskless-4.2.1-2,panther-setupgpfs,panther-lsf
power=impi
primarynic=em1
profile=panther-pec6220
provmethod=centos6.5-x86_64-netboot-panther-pec6220
serialport=0
serialspeed=115200
xcatmaster=xcatmn
Thanks!
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
