Re: [xcat-user] Issue when running nodeset - kcmdline & initrd not set using xcat 2.13 and CentOS7

Long LA Cheng Sun, 23 Jul 2017 18:10:25 -0700

Hi,

As pxe is used as the netboot loader, you can check the 'kernel/initrd/kcmdline' configuration in '/tftpboot/pxelinux.cfg/<node>'.

Thanks.

Best Regards

Long Cheng(程龙)
IBM Systems &Technology Group, Development
SOFTWARE ENGINEER
Tel:86-10-82453046
Email:[email protected]
Address: 3F, Building 28, Zhong Guan Cun Software Park, No.8, Dong Bei Wang West Road, Hai Dian District, Beijing 100193, PRC
地址：国际商业机器中国(投资)有限公司, 中国系统科技实验室, 北京市海淀区东北旺西路8号中关村软件园28号楼3层，邮编:100193

----- Original message -----
From: "J. Smith" <[email protected]>
To: xCAT Users Mailing list <[email protected]>
Cc:
Subject: Re: [xcat-user] Issue when running nodeset - kcmdline & initrd not set using xcat 2.13 and CentOS7
Date: Sat, Jul 22, 2017 3:18 AM

Hi,
Are you saying that kcmdline and initrd does not need to be defined anymore for a diskless installation? So how does the new xCAT knows where to get initrd and the kcmdline for pxe boot?

I checked this path /tftpboot/petitboot/ but I don't have it on my environment.

Thanks.

On Thu, Jul 20, 2017 at 6:13 PM, Casandra H Qiu <[email protected]> wrote:
Hi:

For better performance, nodeset will not add kcmdline and initrd to node definition any more.
But you can find those in the /tftpboot/petitboot/nodename after ran nodeset command.

Thanks,
Casandra

...................................................................
Casandra Hong Qiu
Phone: (845) 433-9291, t/l 293-9291
Office: Building 8, 3-B-04
[email protected]

"J. Smith" ---07/20/2017 05:48:55 PM---Hello, I have installed a new version of xcat v2.13 on CentOS7 and have migrated

From: "J. Smith" <[email protected]>
To: xCAT Users Mailing list <[email protected].net>
Date: 07/20/2017 05:48 PM
Subject: [xcat-user] Issue when running nodeset - kcmdline & initrd not set using xcat 2.13 and CentOS7

Hello,

I have installed a new version of xcat v2.13 on CentOS7 and have migrated my xcat tables from another xcat server that was running CentOS6 with xcat 2.9

The migrated data looks fine but when adding new nodes, I see some incomplete information after I run nodeset. For instance on node 113 there is no information set on kcmdline & initrd. Information copied over from xcatdump for node 102 looks fine.
Does anyone has any suggestions?

New Environment Information:

2 Managements Nodes set for HA using GPFS to share the xCAT data and I use a VIP Interface to bring up xcat services.

Virtual IP Alias Address: xcatmn 192.168.248.60
Primary Management Node: ms1 192.168.248.61
Secondary Management Node: ms2 192.168.248.62

[[hpcslurm01]root@ms1 x86_64]# lsxcatd -v
Version 2.13.3 (git commit 7f9e0b57554c3a1975b83308935b7d183c632a9d, built Thu Apr 13 01:56:07 EDT 2017)

CentOS 7
Linux ms1 3.10.0-229.el7.x86_64

[[hpcslurm01]root@ms1 x86_64]# lsdef -t site -l
Object name: clustersite
    SNsyncfiledir=/var/xcat/syncfiles
    auditnosyslog=0
    auditskipcmds=ALL
    blademaxp=64
    cleanupxcatpost=no
    consoleondemand=no
    databaseloc=/var/lib
    db2installloc=/mntdb2
    dhcpinterfaces=em3:0
    dhcplease=43200
    dnshandler=ddns
    domain=panther.net
    enableASMI=no
    forwarders=131.94.205.10,131.94.7.220
    fsptimeout=0
    installdir=/install
    ipmimaxp=64
    ipmiretries=3
    ipmitimeout=2
    master=192.168.248.60
    maxssh=8
    nameservers=192.168.248.61,192.168.248.62
    nodesyncfiledir=/var/xcat/node/syncfiles
    ntpservers=ms1,ms2
    powerinterval=0
    ppcmaxp=64
    ppcretry=3
    ppctimeout=0
    sharedtftp=1
    sshbetweennodes=ALLGROUPS
    syspowerinterval=0
    tftpdir=/tftpboot
    timezone=America/New_York
    useNmapfromMN=no
    vsftp=n
    xcatconfdir=/etc/xcat
    xcatdport=3001
    xcatiport=3002
    xcatsslversion=TLSv1

Migrated data for node 102 looks fine:
[[hpcslurm01]root@ms1 x86_64]# lsdef n102
Object name: n102
    arch=x86_64
    bmc=r102
    currstate=netboot centos6.5-x86_64-panther-pec6220
    groups=panther-pem420,dell
    hostnames=n102
    initrd=xcat/osimage/centos6.5-x86_64-netboot-panther-pec6220/initrd-stateless.gz
    installnic=em1
    ip=192.168.248.142
    kcmdline=imgurl=http://xcatmn:80//install/netboot/centos6.5/x86_64/panther-pec6220/rootimg.gz XCAT=xcatmn:3001 NODE=n102 FC=0 ifname=em1:F8:CA:B8:A9:0E:04 netdev=em1 console=tty0 console=ttyS0,115200
    kernel=xcat/osimage/centos6.5-x86_64-netboot-panther-pec6220/kernel
    mac=F8:CA:B8:A9:0E:04
    mgt=ipmi
    netboot=pxe
    os=centos6.5
    postscripts=syslog,remoteshell,otherpkgs,syncfiles,panther-bondtrunknics,panther-ldap,panther-nouserlogin,panther-engineerlicense,panther-resolv,panther-yumrepo-centos65,panther-rpms,panther-mlnx-ofed,panther-upgradegpfs-diskless-4.2.1-2,panther-setupgpfs,panther-lsf
    power=impi
    primarynic=em1
    profile="">    provmethod=centos6.5-x86_64-netboot-panther-pec6220
    serialport=0
    serialspeed=115200
    status=booted
    statustime=02-08-2017 16:57:05
    updatestatus=synced
    updatestatustime=03-30-2017 17:15:00
    xcatmaster=xcatmn

New added node 113 is not setup properly, there is no information set on kcmdline & initrd
[[hpcslurm01]root@ms1 x86_64]# lsdef n113
Object name: n113
    arch=x86_64
    bmc=r113
    currstate=netboot centos6.5-x86_64-panther-pec6220
    groups=panther-pem420,dell
    hostnames=n113
    installnic=em1
    ip=192.168.248.153
    mac=48:4D:7E:81:F2:93
    mgt=ipmi
    netboot=pxe
    os=centos6.5
    postscripts=syslog,remoteshell,otherpkgs,syncfiles,panther-bondtrunknics,panther-ldap,panther-nouserlogin,panther-engineerlicense,panther-resolv,panther-yumrepo-centos65,panther-rpms,panther-mlnx-ofed,panther-upgradegpfs-diskless-4.2.1-2,panther-setupgpfs,panther-lsf
    power=impi
    primarynic=em1
    profile="">    provmethod=centos6.5-x86_64-netboot-panther-pec6220
    serialport=0
    serialspeed=115200
    xcatmaster=xcatmn

Thanks!

------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org!http://sdm.link/slashdot_______________________________________________ xCAT-user mailing list [email protected].net
https://lists.sourceforge.net/lists/listinfo/xcat-user

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected].net
https://lists.sourceforge.net/lists/listinfo/xcat-user

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user

Re: [xcat-user] Issue when running nodeset - kcmdline & initrd not set using xcat 2.13 and CentOS7

Reply via email to