Hi Yuan,
that’s what I thought should be happening – but it isn’t working properly.
When I log into the node and compare /etc/resolv.conf and
/.default/etc/resolv.conf they are not the same.
I wondering if there’s a configuration setting that I’ve got wrong.
Best,
Jeff
From: Yuan Y Bai [mailto:[email protected]]
Sent: 02 July 2018 03:40
To: [email protected]
Cc: [email protected]
Subject: Re: [xcat-user] resolv.conf multiple search domains
Hi Jeff,
You can also customize /etc/resolv.conf.
When a node boots up in statelite mode, it will by default copy all of its
tmpfs files from the .default directory of the root image, for example
/install/netboot/rhels7.3/x86_64/compute/rootimg/.default, so there is not
required to set up a litetree table. If you decide that you want some of the
files pulled from different locations that are different per node, you can use
this table. The litetree table controls where the initial content of the files
in the litefile table come from, and the long term content of the ro files.
Best Regards
--------------------------------------------------
Yuan Bai (白媛)
CSTL HPC System Management Development
Tel:86-10-82451401
E-mail: [email protected]<mailto:[email protected]>
Address: IBM ZGC Campus. Ring Building 28,
ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District,
Beijing P.R.China 100193
IBM环宇大厦
北京市海淀区东北旺西路8号，中关村软件园28号楼
邮编:100193
----- Original message -----
From: Jeff Berry
<[email protected]<mailto:[email protected]>>
To: xCAT Users Mailing list
<[email protected]<mailto:[email protected]>>
Cc:
Subject: [xcat-user] resolv.conf multiple search domains
Date: Fri, Jun 29, 2018 9:54 PM
Good afternoon,
configuring the cluster is proceeding apace, and I find myself unclear on how
best to deal with some dns issues.
xcat 2.14.1, Master and statelite nodes all running CentOS7.5
When I boot, a resolv.conf file is being generated and installed, and although
it has the right nameservers, it does not have the search domains we want.
After liteimg, the .defaults/etc/resolv.conf file contains just the dummy line.
And on boot, I end up with a resolv.conf that looks like:
search <domain1> <domain1>
nameserver <ns1>
nameserver <ns2>
nameserver <ns3>
nameserver <ns4>
That is, the same domain is duplicated on the search line. The nameservers
themselves are correct, though.
I tried editing the .defaults/etc/resolv.conf file, but it had no effect.
Obviously I am unclear on how that resolv.conf file is being generated, and any
pointers that anyone can provide will be gratefully followed up.
Jeff Berry, MRC CBU
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]<mailto:[email protected]>
https://lists.sourceforge.net/lists/listinfo/xcat-user
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
xCAT-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcat-user
