On 5/22/19 8:52 AM, Yuan Y Bai wrote: > Hi Roosen, > > Could you try to use `confignetwork -s` instead of `confignetwork` in > your postscripts? > > You can use this command to change your postscripts: chdef node1 > postscripts="syslog,remoteshell,syncfiles,confignetwork -s" > > I think you use install NIC as one of bond slaves. `confignetwork -s` > can configure hostname during configure install NIC, after that, it > start to create bond. >
Thanks for the suggestion. I added the "-s" switch, still the issue is the same. In the logs I see that the "bonding" module fails to load when provisioning, maybe I have to add this module somewhere (initramfs ?). rt..: confignics confignics on node1: config install nic:0, remove: 0, iba ports: 1 ib0!10.148.251.11 bond0!1.2.3.4 bond1!6.7.8.9 confignics on node1: unknown nic type for bond0: 1.2.3.4 . confignics on node1: unknown nic type for bond1: 6.7.8.9 . confignics on node1: executed script: configib for nics: ib0, ports: 1 bond0!BONDING_OPTS=mode=2 bond1!MTU=9000 ...: confignics return with 1 [...] configure nic and its device : bond0 enp195s0f0@enp195s0f1 type=ethernet ond0". [E]:Error: Fail to load kernel module "bonding" [I]: >> ./nicutils.sh: line 1391: /sys/class/net/bonding_masters: Permission denied [E]:Error: stage 0: Fail to create bond device "bond0" Thanks. Nicolas > > Best Regards > -------------------------------------------------- > Yuan Bai (白媛) > > CSTL HPC System Management Development > Tel:86-10-82451401 > E-mail: by...@cn.ibm.com > Address: IBM ZGC Campus. Ring Building 28, > ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District, > Beijing P.R.China 100193 > > IBM环宇大厦 > 北京市海淀区东北旺西路8号，中关村软件园28号楼 > 邮编:100193 > > > > ----- Original message ----- > From: "Roosen, Nicolas" <nicolas.roo...@hpe.com> > To: "xcat-user@lists.sourceforge.net" <xcat-user@lists.sourceforge.net> > Cc: > Subject: [EXTERNAL] [xcat-user] confignetwork and localhost hostname > Date: Tue, May 21, 2019 8:34 PM > > Hello, on xCAT 2.14.6 w/ RHEL 7.6, I have this weird issue: after > provisioning the hostname is not correctly set, it stays to "localhost". > > This happened since I added the "confignetwork" script to the node > definition (to setup bonded interfaces). > > Here are some details: > > lsdef -t node -o node1 > > Object name: node1 > arch=x86_64 > currchain=boot > currstate=install rhels7.6-x86_64-compute > groups=all > installnic=mac > ip=1.2.3.4 > mac=08:00:00:00:00:00 > mgt=none > netboot=xnba > nicdevices.bond0=enp195s0f0|enp195s0f1 > nicdevices.bond1=enP2p193s0|enP3p65s0 > nicextraparams.bond0=BONDING_OPTS=mode=2 > nicextraparams.bond1=MTU=9000 > nicips.bond0=1.2.3.4 > nicips.bond1=6.7.8.9 > nicnetworks.bond0=1_1_3_4-255_255_0_0 > nicnetworks.bond1=6_7_8_9-255_255_255_0 > nictypes.enP3p65s0=ethernet > nictypes.bond0=bond > nictypes.bond1=bond > nictypes.enp195s0f1=ethernet > nictypes.enP2p193s0=ethernet > nictypes.enp195s0f0=ethernet > os=rhels7.6 > postbootscripts=otherpkgs > postscripts=syslog,remoteshell,syncfiles,confignetwork > primarynic=mac > profile=compute > provmethod=rhels7.6-x86_64-install-node > routenames=defaultroute > status=booted > statustime=05-20-2019 17:42:15 > updatestatus=synced > updatestatustime=05-20-2019 14:31:18 > > > lsdef -t osimage -o rhels7.6-x86_64-install-node > > Object name: rhels7.6-x86_64-install-node > addkcmdline=earlyprintk=ttyS0,115200 console=tty0 > console=ttyS0,115200 > imagetype=linux > osarch=x86_64 > osdistroname=rhels7.6-x86_64 > osname=Linux > osvers=rhels7.6 > otherpkgdir=/install/post/otherpkgs/rhels7.6/x86_64 > > otherpkglist=/install/custom/install/rh/sdflex.rhels7.otherpkgs.pkglist > partitionfile=/install/custom/install/rh/sdflexparitions > > pkgdir=/install/rhels7.6/x86_64,/install/post/otherpkgs/rhels7.6/x86_64 > pkglist=/opt/xcat/share/xcat/install/rh/sdflex.rhels7.pkglist > profile=compute > provmethod=install > template=/install/custom/install/rh/sdflex.rhels7.tmpl > > -- > Nicolas > _______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
