Re: [xcat-user] confignetwork and localhost hostname

Yuan Y Bai Thu, 23 May 2019 03:28:56 -0700

Hi Nicolas

Based on your log, you use `confignics`. `confignics` cannot configure bond.

Could you try to use like the following command to configure bond?

chdef cn1 postbootscripts="otherpkgs,confignetwork -s" postscripts="syslog,remoteshell,syncfiles"

Best Regards
--------------------------------------------------
Yuan Bai (白媛)

CSTL HPC System Management Development
Tel:86-10-82451401
E-mail: by...@cn.ibm.com
Address: IBM ZGC Campus. Ring Building 28,
ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District,
Beijing P.R.China 100193

IBM环宇大厦
北京市海淀区东北旺西路8号，中关村软件园28号楼
邮编:100193

----- Original message -----
From: "Roosen, Nicolas" <nicolas.roo...@hpe.com>
To: "xcat-user@lists.sourceforge.net" <xcat-user@lists.sourceforge.net>
Cc:
Subject: [EXTERNAL] Re: [xcat-user] confignetwork and localhost hostname
Date: Wed, May 22, 2019 3:51 PM

On 5/22/19 8:52 AM, Yuan Y Bai wrote:
> Hi Roosen,
>
> Could you try to use `confignetwork -s` instead of `confignetwork` in
> your postscripts?
>
> You can use this command to change your postscripts: chdef node1
> postscripts="syslog,remoteshell,syncfiles,confignetwork -s"
>
> I think you use install NIC as one of bond slaves. `confignetwork -s`
> can configure hostname during configure install NIC, after that, it
> start to create bond.
>

Thanks for the suggestion. I added the "-s" switch, still the issue is
the same.

In the logs I see that the "bonding" module fails to load when
provisioning, maybe I have to add this module somewhere (initramfs ?).

rt..: confignics
confignics on node1: config install nic:0, remove: 0, iba ports: 1
ib0!10.148.251.11
bond0!1.2.3.4
bond1!6.7.8.9
confignics on node1: unknown nic type for bond0: 1.2.3.4 .
confignics on node1: unknown nic type for bond1: 6.7.8.9 .
confignics on node1: executed script: configib for nics: ib0, ports: 1
bond0!BONDING_OPTS=mode=2
bond1!MTU=9000
...: confignics return with 1
[...]
configure nic and its device : bond0 enp195s0f0@enp195s0f1
type=ethernet
ond0".
[E]:Error: Fail to load kernel module "bonding"
[I]: >>
./nicutils.sh: line 1391: /sys/class/net/bonding_masters: Permission denied
[E]:Error: stage 0: Fail to create bond device "bond0"

Thanks.
Nicolas

>
> Best Regards
> --------------------------------------------------
> Yuan Bai (白媛)
>
> CSTL HPC System Management Development
> Tel:86-10-82451401
> E-mail: by...@cn.ibm.com
> Address: IBM ZGC Campus. Ring Building 28,
> ZhongGuanCun Software Park,No.8 Dong Bei Wang West Road, Haidian District,
> Beijing P.R.China 100193
>
> IBM环宇大厦
> 北京市海淀区东北旺西路8号，中关村软件园28号楼
> 邮编:100193
>
>
>
> ----- Original message -----
> From: "Roosen, Nicolas" <nicolas.roo...@hpe.com>
> To: "xcat-user@lists.sourceforge.net" <xcat-user@lists.sourceforge.net>
> Cc:
> Subject: [EXTERNAL] [xcat-user] confignetwork and localhost hostname
> Date: Tue, May 21, 2019 8:34 PM
>
> Hello, on xCAT 2.14.6 w/ RHEL 7.6, I have this weird issue: after
> provisioning the hostname is not correctly set, it stays to "localhost".
>
> This happened since I added the "confignetwork" script to the node
> definition (to setup bonded interfaces).
>
> Here are some details:
>
> lsdef -t node -o node1
>
> Object name: node1
>    arch=x86_64
>    currchain=boot
>    currstate=install rhels7.6-x86_64-compute
>    groups=all
>    installnic=mac
>    ip=1.2.3.4
>    mac=08:00:00:00:00:00
>    mgt=none
>    netboot=xnba
>    nicdevices.bond0=enp195s0f0|enp195s0f1
>    nicdevices.bond1=enP2p193s0|enP3p65s0
>    nicextraparams.bond0=BONDING_OPTS=mode=2
>    nicextraparams.bond1=MTU=9000
>    nicips.bond0=1.2.3.4
>    nicips.bond1=6.7.8.9
>    nicnetworks.bond0=1_1_3_4-255_255_0_0
>    nicnetworks.bond1=6_7_8_9-255_255_255_0
>    nictypes.enP3p65s0=ethernet
>    nictypes.bond0=bond
>    nictypes.bond1=bond
>    nictypes.enp195s0f1=ethernet
>    nictypes.enP2p193s0=ethernet
>    nictypes.enp195s0f0=ethernet
>    os=rhels7.6
>    postbootscripts=otherpkgs
>    postscripts=syslog,remoteshell,syncfiles,confignetwork
>    primarynic=mac
>    profile="">>    provmethod=rhels7.6-x86_64-install-node
>    routenames=defaultroute
>    status=booted
>    statustime=05-20-2019 17:42:15
>    updatestatus=synced
>    updatestatustime=05-20-2019 14:31:18
>
>
> lsdef -t osimage -o rhels7.6-x86_64-install-node
>
> Object name: rhels7.6-x86_64-install-node
>    addkcmdline=earlyprintk=ttyS0,115200 console=tty0
> console=ttyS0,115200
>    imagetype=linux
>    osarch=x86_64
>    osdistroname=rhels7.6-x86_64
>    osname=Linux
>    osvers=rhels7.6
>    otherpkgdir=/install/post/otherpkgs/rhels7.6/x86_64
>
> otherpkglist=/install/custom/install/rh/sdflex.rhels7.otherpkgs.pkglist
>    partitionfile=/install/custom/install/rh/sdflexparitions
>
> pkgdir=/install/rhels7.6/x86_64,/install/post/otherpkgs/rhels7.6/x86_64
>    pkglist=/opt/xcat/share/xcat/install/rh/sdflex.rhels7.pkglist
>    profile="">>    provmethod=install
>    template=/install/custom/install/rh/sdflex.rhels7.tmpl
>
> --
> Nicolas
>

_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

_______________________________________________
xCAT-user mailing list
xCAT-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcat-user

Re: [xcat-user] confignetwork and localhost hostname

Reply via email to