Thanks for the pointers Kevin. As mentioned earlier (see email dated May 23, 2019, 3:09 PM), if I get a working node (ie: manual OS install) and then run the "openssl" command with appropriate xml from the "doxcat" and "getdestiny" scripts, I get expected responses from the xcat master node. Please keep the ideas coming. Hopefully something is either a new idea or triggers a new thought.
On Fri, May 24, 2019 at 1:49 PM Kevin Keane <kke...@sandiego.edu> wrote: > I believe the xnba.kpxe is retrieved via TFTP, while the next two steps > should happen by HTTPS. Maybe there is a problem with https? > > Check to see if you have a firewall enabled, and also use netstat -ltunp > to check that something is actually listening on port 3001. > > _______________________________________________________________________ > Kevin Keane | Systems Architect | University of San Diego ITS | > kke...@sandiego.edu > Maher Hall, 192 |5998 Alcalá Park | San Diego, CA 92110-2492 | 619.260.6859 > | Text: 760-721-8339 > > *REMEMBER! **No one from IT at USD will ever ask to confirm or supply > your password*. > These messages are an attempt to steal your username and password. Please > do not reply to, click the links within, or open the attachments of these > messages. Delete them! > > > > > On Thu, May 23, 2019 at 11:49 AM Andrew Loftus <alof...@illinois.edu> > wrote: > >> Thank you for pointing me to ` journalctl -u xcatd -f`, that shows me >> that xcat/xnba.kpxe is requested (and I assume provided to the booting >> node). >> However, after that, I see no more activity on the xcat master. I would >> expect activity recorded on the xcat master at the steps: >> xcat.genesis.doxcat: Getting initial certificate --> 172.30.18.6:3001 >> xcat.genesis.doxcat: Running getdestiny --> 172.30.18.6:3001 >> >> Both of those commands above seem to timeout with no apparent response >> from the xcat master. The ip address and port specified are correct for the >> xcat master. >> I have ensured that iptables is open for those ports. >> I have ensure that there is a process listening on port 3001. >> >> What else should I check? >> >> Can I get more debug info from the genesis kernel? >> >> Can I get more debug info from the xcat master? >> >> On Thu, May 23, 2019 at 4:51 AM Song BJ Yang <yang...@cn.ibm.com> wrote: >> >>> Hi, >>> >>> You can watch the output of `journalctl -u xcatd -f` in another session >>> during nodediscovery >>> >>> there are some similar issues reported before, see >>> https://sourceforge.net/p/xcat/mailman/search/?q=Unrecognized+directive+ , >>> you can simply go through them for any hint >>> >>> ------------------------------------------------------------------------------ >>> YANG Song (杨嵩) >>> IBM China System Technology Laboratory >>> Tel: 86-10-82452903 >>> Email: yang...@cn.ibm.com >>> Address: Building 28, ZhongGuanCun Software Park, >>> No.8, Dong Bei Wang West Road, Haidian District Beijing 100193, PRC >>> >>> 北京市海淀区东北旺西路8号中关村软件园28号楼 >>> 邮编: 100193 >>> >>> >>> >>> ----- Original message ----- >>> From: Andrew Loftus <alof...@illinois.edu> >>> To: xCAT Users Mailing list <xcat-user@lists.sourceforge.net> >>> Cc: >>> Subject: [EXTERNAL] [xcat-user] Unrecognized directive (dest=) during >>> nodediscovery >>> Date: Thu, May 23, 2019 6:58 AM >>> >>> Setting up a new test cluster and getting the following on the compute >>> node during nodediscovery: >>> >>> xcat.genesis.doxcat: Running getdestiny --> 172.30.18.6:3001 >>> >>> xcat.genesis.doxcat: Received destiny= >>> xcat.genesis.doxcat: The destiny=, destiny parameters= >>> xcat.genesis.doxcat: Unrecognized directive (dest=) >>> xcat.genesis.doxcat: ... Will retry xCAT in 40 seconds >>> xcat.genesis.doxcat: ... Will retry xCAT in 30 seconds >>> >>> There are no "discovery" type messages in /var/log/messages or in >>> /var/log/xcat/cluster.log. >>> >>> Where to look for more troubleshooting information? >>> >>> >>> Version info: >>> # lsxcatd -a >>> Version 2.14.6 (git commit 7c787c499ebca7a98d6fcdb3577f701ac16d7ab3, >>> built Fri Mar 29 03:19:08 EDT 2019) >>> This is a Management Node >>> dbengine=SQLite >>> _______________________________________________ >>> xCAT-user mailing list >>> xCAT-user@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/xcat-user >>> >>> >>> >>> _______________________________________________ >> xCAT-user mailing list >> xCAT-user@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/xcat-user >> >
_______________________________________________ xCAT-user mailing list xCAT-user@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/xcat-user
