Moin Guys, thank you for all the help with the connection. Unfortunately, my trusty old HP310 went up in smoke today, probably due to a short circuit in a faulty cable (bent too hard). It does get considerably hot when running and no longer launches programs from the SD card properly and the display is all flickers and dark stripes while the processor or memory is at work during startup, only brightens up after a while when nothing is processed.
Seems I need to find a new toy. :o/ Viele Grüße, Martin Kopplow --- Am 19.02.2011 um 18:47 schrieb "[email protected]" <[email protected]>: > Moin, > > until now, I have only used XCSoar on my HP310 as a standalone device, not > connected to any other instrument. > > I have now been trying to connect it to my Flarm device in order to use the > same GPS data and also get the flarm warnings displayed on the HP, and also > use the flarm as another logger. The Manual has nothing here. Now ... I'm > kind of stuck. > > I do not have any information on how the settings should be for this > connection. > Com Port? Baud rate? What device device type for connecting with flarm? > > And then: How to check? As far as I understand, there will be no flarm > display unless flarm traffic is close, so what will I see once it works with > no traffic in my area? > > The only feedback I have so far is that when trying to declare I get a > message "No Logger Found" or so. > > > Viele Grüße, > Martin Kopplow > > --- > ------------------------------------------------------------------------------ > The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: > Pinpoint memory and threading errors before they happen. > Find and fix more than 250 security defects in the development cycle. > Locate bottlenecks in serial and parallel code that limit performance. > http://p.sf.net/sfu/intel-dev2devfeb > _______________________________________________ > Xcsoar-user mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/xcsoar-user ------------------------------------------------------------------------------ The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE: Pinpoint memory and threading errors before they happen. Find and fix more than 250 security defects in the development cycle. Locate bottlenecks in serial and parallel code that limit performance. http://p.sf.net/sfu/intel-dev2devfeb _______________________________________________ Xcsoar-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/xcsoar-user
