Mine must be a different issue as the screen never locks up and I can let the
screen saver come on for a long time and it does not appear to have any affect.
No matter what is going on, about every 3 minutes the GPS link goes away and I
have to reselect the GPS device I want to use.
On Mar 23, 2011, at 8:58 AM, Schoen, Andre (Siemens TS) wrote:
> If this is of any help,
> I had a similar issue with an early 6.x beta version
> With similar issue, I mean a gap in the log (as shown in your appendix)
>
> Never conclusively found the reason, but it seemed to be linked to the
> locking of my PDA (HTC and WM6.1) after a pre-defined time (unfortunately
> hardwired in the corporate SW, can not switch off).
>
> What did work in my case was to make sure I did not let the screen saver /
> lock coming on by pressing a button every 5-10 minutes.
>
>
> regards,
>
> Andre
>
> -----Original Message-----
> From: Steve Freeman [mailto:[email protected]]
> Sent: 23 March 2011 13:47
> To: Roman Stoklasa
> Cc: [email protected]
> Subject: Re: [Xcsoar-user] GPS connection problem
>
> I finally realized that for a log to be created the unit must be moving so I
> turned in on in the car on the way to work. I was unable to record the exact
> times and drive but they should be close to the times in my previous post.
> Attached is the log. Please let me know if any of the developers can help
> given this info.
>
> Steve Freeman
>
>
Steve Freeman
[email protected]
713-859-0229
------------------------------------------------------------------------------
Enable your software for Intel(R) Active Management Technology to meet the
growing manageability and security demands of your customers. Businesses
are taking advantage of Intel(R) vPro (TM) technology - will your software
be a part of the solution? Download the Intel(R) Manageability Checker
today! http://p.sf.net/sfu/intel-dev2devmar
_______________________________________________
Xcsoar-user mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
