Hi David, I have PowerFlarm Core - V7 - IOIO - Dell Streak 5, the system
works well. I would check that Config >Map Display > Elements has FLARM
traffic: On
Btw, I highly recommend the upgrade to the latest V7 firmware, the inertial
filtering on the vario is fantastic.
Luke
On Mon, Oct 21, 2013 at 2:24 PM, David Reitter <david.reit...@gmail.com>wrote:
> Thanks for your comments, everybody.
>
> I pulled my glider out of the trailer this morning before rushing off to
> work.
>
> FLARM $PFLAU sentences do arrive at my XCSoar device (in device monitor);
> this is PowerFLARM -> LXNAV V7 -> [via bluetooth] Dell Streak 5, all set
> to 9600 bps.
>
> I don't know if they arrive reliably in flight; this is just with one or
> two ADS-B or Mode-C targets on the ground.
>
> Gauges -> Flarm is set to "on". Is there any other setting I should check?
>
>
> On Oct 21, 2013, at 2:09 PM, Hannu Niemi <hnpi...@phnet.fi> wrote:
>
> > AFAIK 19.2k is required minimium because the needed sentences won't
> "fit" in the data flow below it. Lower than that and you only get
> coordinates+altitude. Though my expreciene is on "normal" Flarm (with or
> without LX 166). I am quite positive that I have read it somewhere on the
> net but (as so often happens) can't just now locate it...
> >
> > hannu
> >
> > On 21.10.2013 15:30, David Reitter wrote:
> >> On Oct 21, 2013, at 12:00 AM, Hannu Niemi <hnpi...@phnet.fi> wrote:
> >>
> >>> Just want to make a simple check. Is your baud rate 19200 or higher.
> At least in my LX 166 setup (LX/Colibri driver) the 19200 is required for
> Flarm data to appear...
> >> Hannu, thanks.
> >> My baud rate is set to 9600, because that's how the Bluetooth adapter
> is configured.
> >>
> >> The PowerFLARM manual does not say anything to that effect. I will
> get my glider out of the box and see which sentences arrive on the PDA end.
> >>
> >> - David
> >>
> >> -----
> >> No virus found in this message.
> >> Checked by AVG - www.avg.com
> >> Version: 2014.0.4158 / Virus Database: 3614/6768 - Release Date:
> 10/21/13
> >>
> >>
> >>
> >
>
>
>
> ------------------------------------------------------------------------------
> October Webinars: Code for Performance
> Free Intel webinars can help you accelerate application performance.
> Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most
> from
> the latest Intel processors and coprocessors. See abstracts and register >
> http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
> _______________________________________________
> Xcsoar-user mailing list
> Xcsoar-user@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/xcsoar-user
>
------------------------------------------------------------------------------
October Webinars: Code for Performance
Free Intel webinars can help you accelerate application performance.
Explore tips for MPI, OpenMP, advanced profiling, and more. Get the most from
the latest Intel processors and coprocessors. See abstracts and register >
http://pubads.g.doubleclick.net/gampad/clk?id=60135991&iu=/4140/ostg.clktrk
_______________________________________________
Xcsoar-user mailing list
Xcsoar-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/xcsoar-user
