Hi, Apparently vif2.0-emu was already binded with br0 when "brctl addif br0 vif2.0-emu" failed.
root@colob-HP-Compaq-6005-Pro-MT-PC:~# brctl addif br0 vif2.0-emu device vif2.0-emu is already a member of a bridge; can't enslave it to bridge br0. root@colob-HP-Compaq-6005-Pro-MT-PC:~# brctl show bridge name bridge id STP enabled interfaces br0 8000.001a3fc46255 no eth0 vif2.0 vif2.0-emu br1 8000.000000000000 no About the iptables, it seems like SECCOLO target can't be recognised. root@colob-HP-Compaq-6005-Pro-MT-PC:~# iptables -t mangle -D PREROUTING -m physdev --physdev-in vif2.0-emu -j SECCOLO --index 1 iptables: No chain/target/match by that name. Here is my active modules matching colo: root@colob-HP-Compaq-6005-Pro-MT-PC:~# lsmod | grep -i colo xt_SECCOLO 16384 1 nf_conntrack_colo 16384 2 xt_SECCOLO x_tables 36864 8 xt_physdev,ip6table_mangle,ip_tables,xt_SECCOLO,xt_tcpudp,iptable_filter,iptable_mangle,ip6_tables nf_conntrack 106496 4 xt_SECCOLO,nf_nat,nf_conntrack_colo,nf_conntrack_ipv4 So i was looking in the iptables and this really looks like the source of the problem. Sadi. On Tue, Nov 8, 2016 at 5:57 PM, Konrad Rzeszutek Wilk < konrad.w...@oracle.com> wrote: > > entered forwarding state > > Nov 7 18:10:30 colob NetworkManager[907]: <info> (vif2.0-emu): enslaved > > to br0 > > Nov 7 18:10:30 colob root: /etc/xen/scripts/colo-proxy-setup: brctl > addif > > br0 vif2.0-emu failed > > > How come this failed? > > > Nov 7 18:10:30 colob root: /etc/xen/scripts/colo-proxy-setup: iptables > -t > > mangle -D PREROUTING -m physdev --physdev-in vif2.0-emu -j SECCOLO > --index > > 1 failed > > Ah b/c of this. Are there any errors of what exactly failed? > -- Sadi.
_______________________________________________ Xen-devel mailing list Xen-devel@lists.xen.org https://lists.xen.org/xen-devel