Hello Vijay,
On 09/02/17 15:56, vijay.kil...@gmail.com wrote:
From: Vijaya Kumar K <vijaya.ku...@cavium.com>
Move some common numa code from xen/arch/x86/srat.c
to xen/common/numa.c
Signed-off-by: Vijaya Kumar K <vijaya.ku...@cavium.com>
---
xen/arch/x86/srat.c | 54 ++++-----------------------------------------
xen/common/numa.c | 55 ++++++++++++++++++++++++++++++++++++++++++++++
xen/include/asm-x86/acpi.h | 1 -
xen/include/asm-x86/numa.h | 1 -
xen/include/xen/numa.h | 5 ++++-
5 files changed, 63 insertions(+), 53 deletions(-)
diff --git a/xen/arch/x86/srat.c b/xen/arch/x86/srat.c
index d86783e..58dee09 100644
--- a/xen/arch/x86/srat.c
+++ b/xen/arch/x86/srat.c
@@ -25,7 +25,7 @@ static struct acpi_table_slit *__read_mostly acpi_slit;
static nodemask_t memory_nodes_parsed __initdata;
static nodemask_t processor_nodes_parsed __initdata;
-static struct node nodes[MAX_NUMNODES] __initdata;
+extern struct node nodes[MAX_NUMNODES] __initdata;
struct pxm2node {
unsigned pxm;
@@ -36,9 +36,9 @@ static struct pxm2node __read_mostly pxm2node[MAX_NUMNODES] =
static unsigned node_to_pxm(nodeid_t n);
-static int num_node_memblks;
-static struct node node_memblk_range[NR_NODE_MEMBLKS];
-static nodeid_t memblk_nodeid[NR_NODE_MEMBLKS];
+extern int num_node_memblks;
+extern struct node node_memblk_range[NR_NODE_MEMBLKS];
+extern nodeid_t memblk_nodeid[NR_NODE_MEMBLKS];
static __initdata DECLARE_BITMAP(memblk_hotplug, NR_NODE_MEMBLKS);
static inline bool_t node_found(unsigned idx, unsigned pxm)
@@ -103,52 +103,6 @@ nodeid_t setup_node(unsigned pxm)
return node;
}
-int valid_numa_range(u64 start, u64 end, nodeid_t node)
-{
- int i;
-
- for (i = 0; i < num_node_memblks; i++) {
- struct node *nd = &node_memblk_range[i];
-
- if (nd->start <= start && nd->end > end &&
- memblk_nodeid[i] == node )
- return 1;
- }
-
- return 0;
-}
-
-static __init int conflicting_memblks(u64 start, u64 end)
-{
- int i;
-
- for (i = 0; i < num_node_memblks; i++) {
- struct node *nd = &node_memblk_range[i];
- if (nd->start == nd->end)
- continue;
- if (nd->end > start && nd->start < end)
- return i;
- if (nd->end == end && nd->start == start)
- return i;
- }
- return -1;
-}
-
-static __init void cutoff_node(int i, u64 start, u64 end)
-{
- struct node *nd = &nodes[i];
- if (nd->start < start) {
- nd->start = start;
- if (nd->end < nd->start)
- nd->start = nd->end;
- }
- if (nd->end > end) {
- nd->end = end;
- if (nd->start > nd->end)
- nd->start = nd->end;
- }
-}
-
static __init void bad_srat(void)
{
int i;
diff --git a/xen/common/numa.c b/xen/common/numa.c
index 59dcb63..13f147c 100644
--- a/xen/common/numa.c
+++ b/xen/common/numa.c
@@ -46,6 +46,61 @@ nodeid_t cpu_to_node[NR_CPUS] __read_mostly = {
cpumask_t node_to_cpumask[MAX_NUMNODES] __read_mostly;
+int num_node_memblks;
+struct node node_memblk_range[NR_NODE_MEMBLKS];
+nodeid_t memblk_nodeid[NR_NODE_MEMBLKS];
+struct node nodes[MAX_NUMNODES] __initdata;
+
+int valid_numa_range(u64 start, u64 end, nodeid_t node)
I am not sure why you move this code in common code when it is not even
used in your series.
Furthermore, please use paddr_t rather than u64.
+{
+#ifdef CONFIG_NUMA
common/numa.c should really not be compiled at all for configuration not
supporting NUMA. In other words, I really don't want to see #ifdefery in
common/numa.c.
+ int i;
+
+ for (i = 0; i < num_node_memblks; i++) {
I know you are moving code around, but fix the coding style before hand
would have been appreciated.
+ struct node *nd = &node_memblk_range[i];
+
+ if (nd->start <= start && nd->end > end &&
+ memblk_nodeid[i] == node )
+ return 1;
+ }
+
+ return 0;
+#else
+ return 1;
+#endif
+}
+
+__init int conflicting_memblks(u64 start, u64 end)
Ditto for u64.
+{
+ int i;
+
+ for (i = 0; i < num_node_memblks; i++) {
+ struct node *nd = &node_memblk_range[i];
+ if (nd->start == nd->end)
+ continue;
+ if (nd->end > start && nd->start < end)
+ return i;
+ if (nd->end == end && nd->start == start)
+ return i;
+ }
+ return -1;
+}
+
+__init void cutoff_node(int i, u64 start, u64 end)
Same remark as above.
+{
+ struct node *nd = &nodes[i];
+ if (nd->start < start) {
+ nd->start = start;
+ if (nd->end < nd->start)
+ nd->start = nd->end;
+ }
+ if (nd->end > end) {
+ nd->end = end;
+ if (nd->start > nd->end)
+ nd->start = nd->end;
+ }
+}
+
/*
* Given a shift value, try to populate memnodemap[]
* Returns :
diff --git a/xen/include/asm-x86/acpi.h b/xen/include/asm-x86/acpi.h
index d36bee9..f1a8e9d 100644
--- a/xen/include/asm-x86/acpi.h
+++ b/xen/include/asm-x86/acpi.h
@@ -106,7 +106,6 @@ extern void acpi_reserve_bootmem(void);
extern s8 acpi_numa;
extern int acpi_scan_nodes(u64 start, u64 end);
-#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
#ifdef CONFIG_ACPI_SLEEP
diff --git a/xen/include/asm-x86/numa.h b/xen/include/asm-x86/numa.h
index 61bcd8e..df1f7d5 100644
--- a/xen/include/asm-x86/numa.h
+++ b/xen/include/asm-x86/numa.h
@@ -28,7 +28,6 @@ extern int srat_disabled(void);
extern void srat_detect_node(int cpu);
extern nodeid_t apicid_to_node[];
-extern int valid_numa_range(u64 start, u64 end, nodeid_t node);
void srat_parse_regions(u64 addr);
extern u8 __node_distance(nodeid_t a, nodeid_t b);
diff --git a/xen/include/xen/numa.h b/xen/include/xen/numa.h
index dd33c92..810f742 100644
--- a/xen/include/xen/numa.h
+++ b/xen/include/xen/numa.h
@@ -11,7 +11,7 @@
#define NUMA_NO_DISTANCE 0xFF
#define MAX_NUMNODES (1 << NODES_SHIFT)
-
Spurious change.
+#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
#define vcpu_to_node(v) (cpu_to_node((v)->processor))
#define domain_to_node(d) \
@@ -66,6 +66,9 @@ static inline __attribute__((pure)) nodeid_t
phys_to_nid(paddr_t addr)
#define clear_node_cpumask(cpu) do {} while (0)
#endif /* CONFIG_NUMA */
+extern int valid_numa_range(u64 start, u64 end, nodeid_t node);
+extern int conflicting_memblks(u64 start, u64 end);
+extern void cutoff_node(int i, u64 start, u64 end);
extern void numa_add_cpu(int cpu);
extern nodeid_t setup_node(unsigned int pxm);
extern void numa_set_node(int cpu, nodeid_t node);
Regards,
--
Julien Grall
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xen.org
https://lists.xen.org/xen-devel